Brother PT-7500, PT-7600 manual Error Message List, Label files saved, Previously are now empty

Problem	Cause	Solution
		All files stored in the internal
	Have the batteries and AC adapter	memory are lost if the batteries and
	been disconnected?	AC adapter are disconnected for
		longer than two minutes.
Label files saved		All data stored in the internal
	Is there enough power remaining in	memory is lost if the batteries
previously are now empty.
	the batteries?	become empty or the AC adapter is
		disconnected.
		The resetting function clears all
	Have you used the Reset function?	data stored in the internal memory,
		including label files.
Error Message List

Error Message		Cause		Solution
	• This message appears if you			• Cancel the Numbering
	try to use the Numbering			function.
1 BLOCK LIMIT!	function when multiple			• Limit the number of text
	blocks of text have been			blocks to 1.
	entered with the PANEL1
	Label Type mode selected.
	• This message appears if 7			• Limit the number of lines in
	lines have already been			a text block to 7.
	entered in a text block when
7 LINE LIMIT!	you press n.
	• This message appears if you			• Adjust the number of lines
	delete		, causing the	so that the block will not
	number of lines in a block to			have more than 7 lines.
	exceed the 7-line limit.
	• This message appears if 50			• Limit the number of lines to
50 LINE LIMIT	lines have already been			50.
REACHED!	entered when you press
	g, then n.
	• The message appears if the			• Reduce the width of the bar
BAR CODE	length of the bar code is			code.
TOO LONG!	longer than 8.8" (22 cm)
	when pressing p.

76