Brother PT-7600, PT-7500 manual Panel2 Mode, Front , Reverse

●BLK LEN. (block length): * For the PORT Label Type mode: 0.80" to 8.00" (20.0 to 200.0 mm) Default: 1.20" (30.0 mm)

*For the PANEL1 Label Type mode: 0.25" to 8.00" (6.0 to 200.0 mm) Default: 1.20" (30.0 mm)

● FRAME:	* For the PORT Label Type mode:
	OFF,		,		, 3 , 4
		1		2
	Default: OFF

*For the PANEL1 Label Type mode:

	OFF, 1		, 2		, 3		,
	4	, 5		, 6		,
	7	, 8		, 9
	Default: OFF
● PRINT (print order):	FRONT, REVERSE
	Default: FRONT

☞For these types of labels, we recommend using Extra Strength Adhesive Tape.

☞The PRINT parameter is only available with the PANEL1 Label Type mode.

☞By using the Numbering function with the PANEL1 Label Type mode, a single label containing multiple blocks of ascending characters can easily be created, for example, to label patch panels as shown above. (For details on the Numbering function, refer to

Printing multiple copies with incremental characters on page 36.)

Panel2 Mode

Specifying a fixed length for each block makes this label useful for a row of switches (for example, in a switchboard) or a patch panel. In addition, the text blocks can be printed in the order that they were typed in or in the opposite order, or the text can be printed rotated 90°.

Panel2

	Block 1	Block 2		Block 3
Block length		Block length		Block length
(Length × Multiple)		(Length × Multiple)	(Length × Multiple)

Label Type Modes

17