Brother PT-7500 manual Rechargeable battery pack for PT-7600 only, AC adapter

WARNING

Rechargeable battery pack (for PT-7600 only)

Follow these guidelines to avoid fire, heat, damage, and electric shock.

Do not use this P-touch labeler with any rechargeable battery pack other than that specified.

To recharge the rechargeable battery pack, insert the rechargeable battery pack into the P-touch labeler, and then use AD-18 designed specifically for this P-touch labeler.

Do not insert or use the rechargeable battery pack in any equipment other than the P- touch labeler. Do not directly connect it to a power supply, car cigarette lighter or electrical outlet.

Do not expose the rechargeable battery pack or the P-touch labeler with the rechargeable battery pack installed to pressure, heat, electric charge or microwaves.

Do not place the rechargeable battery pack or the P-touch labeler with the rechargeable battery pack installed near a fire or in a location exposed to heat or high temperatures (for example, near a flame or stove, in the sun, or in a location where the temperature is 140 °F or more, such as in a hot car).

Do not allow the rechargeable battery pack to get wet.

Do not short-circuit the terminals of the rechargeable battery pack or the P-touch labeler with the rechargeable battery pack installed, such as with a metal object.

Do not pierce the external casing of the rechargeable battery pack in any way. Take care to prevent damage to the rechargeable battery pack, or the P-touch labeler with the rechargeable battery pack installed.

Do not disassemble or alter the rechargeable battery pack or the P-touch labeler with the rechargeable battery pack installed.

Do not use a damaged or deformed rechargeable battery pack.

Do not use in a corrosive environment (for example, exposed to salty air or salt water, or acidic, alkaline or corrosive gas).

Do not insert or remove the rechargeable battery pack when the AC adapter is connected.

AC adapter

Follow these guidelines to avoid fire, damage, electric shock, or failure.

Use only the AC adapter (AD-18) designed exclusively for your P-touch labeler. Failure to observe this may result in an accident or damage. Brother shall not assume any responsibility for any accident or damage resulting from not using the specified AC adapter.

Unplug the power cord immediately and stop using the machine during an electrical storm. There may be a remote risk of electric shock from lightning.

Do not touch the AC adapter or power plug with wet hands.

Do not use the AC adapter in places of high humidity such as bathrooms.

Do not use a damaged power cord.

Do not overload the power outlet.

Do not place heavy objects on, damage or modify the power cord or plug. Do not forcibly bend or pull the power cord.

Do not drop, hit or otherwise damage the AC adapter.

Make sure that the plug is fully inserted in the power outlet. Do not use an outlet that is loose.

ii