alarm time.

TO WAKE TO BUZZER

Step 1 Follow step 1 to step 3 under “TO WAKE TO RADIO”. Step 2 Rotate the VOLUME/BUZZER switch to the “BUZZER”

position. You will be awakened at the pre-selected alarm time by the buzzer tone. To turn the Buzzer off, slide the AUTO/OFF/ON switch to the “OFF” position or press ALARM SET/OFF Button.

ALARM OFF

Slide the AUTO/OFF/ON switch to “OFF” position if you wish to turn off the radio or buzzer after the radio or buzzer has sounded in the Wake to Radio or Wake to Buzzer operation. The alarm will not sound again until the next day unless you switch back to “AUTO” position or use alarm button to shut off alarm, then the radio or buzzer will automatically sound again in 24 hours at the same alarm setting.

SLEEP CONTROL

Step 1 Turn the AUTO/OFF/ON switch on the “AUTO” or “OFF” position.

Step 2 Press the SLEEP button to display the sleep time. The display will indicate 59 minutes. If you wish the radio to play for a shorter period simply press the SLEEP button together with the MINUTE button to set the desired time period, or if you wish to play longer, press SLEEP button along with HOUR button top play for 1 hour and 59 minutes (MAX).

Step 3 Press the SLEEP button. The radio will turn on automatically and will turn itself off when the pre-set time has passed.

NOTE: The maximum sleep time is 1 hour and 59 minutes.

The radio will be switched off automatically when the sleep time expires. To turn the radio off before expiration of sleeping time, simply press the “SNOOZE BUTTON”.

BATTERY BACK-UP

Your clock has a battery back up feature in case of power failure. A 9 volt battery (not included) is required. You must put in a battery to ensure the battery back up feature is ready in case of power failure. If power fails, the back up battery will automatically continue operation of the clock and maintain actual time. However, the display will not be lighted. During actual power failure the alarm function will not be operational. When electrical power is restored, the display will light up again and alarm time set previously is restored. The battery will maintain timekeeping for approximately 8 hours during power failure or interruption.

NOTE: Remove the battery if the clock is to be unplugged for a long time avoid unnecessary battery drain.

Page 7
Image 7
Sylvania SCR1276 manual To Wake to Buzzer, Alarm OFF, Sleep Control, Battery BACK-UP