Brother PT-7500 manual Labeler With a PT-7600 only Using P-touch Computer for

3 Drag the transfer data to the folder you created.

Drag the transfer data from All contents, Layouts or another folder under Filter. When transferring multiple sets of data, you can move all the transfer data to the folder you created.

4 Key Assign numbers are automatically assigned to transferred data inside the folder you made in the previous step.

To change a number, right click the data name in the list view, then select the Key Assign number.

☞ Key Assign is necessary for transfer of data other than message texts.

☞ If you change the Key Assign number used
for data which has already been transferred
to the P-touch labeler, the data will be
overwritten. You can check the Key Assign
number used for data already transferred to
the P-touch labeler by backing up the data
as explained in Backing up label
templates on page 70.
☞ You can click the data name for transfer
data and change to a new name. The
character limit is 15 words.
5 Select the data or folder you want to
transfer, then click	.
The transfer confirmation message is
displayed.	Labeler With a	PT-7600 only)
	Using P-touch	Computer (for

65