Brother PT-7500, PT-7600 manual Block

● BLOCK:	1 to 50 blocks
	Default: 1
LENGTH:	0.25" to 8.00" (6.0 to 200.0 mm)
	Default: 0.70" (17.5mm)

MULTIPLE:	x1 to x9
	Default: 1
● FRAME:	OFF, 1		, 2		, 3
	4	, 5		, 6	,
	7	, 8		, 9
	Default: OFF
● PRINT:	FRONT, REVERSE
	Default: FRONT

,

● ROTATE:	OFF, ON
	Default: OFF

☞The number of blocks can be specified or changed only with the BLOCK parameter. Text blocks cannot be added or deleted in any other way.

☞If the number of blocks specified in the PANEL2 Label Type mode is less than the number of text blocks that have already been entered, entered text blocks are deleted. If the specified number of blocks is greater than the number of entered text blocks, text blocks are added.

☞For these types of labels, we recommend using Extra Strength Adhesive Tape.

☞By using the Numbering function with the PANEL2 Label Type mode, a single label containing multiple blocks of ascending characters can easily be created, for example, to label patch panels as shown above. (For details on the Numbering function, refer to

Printing multiple copies with incremental characters on page 36.)

18