Brother PT-7500, PT-7600 manual Resetting the P-touch Labeler, Troubleshooting

6 Appendix

Resetting the P-touch Labeler

You can reset the internal memory of your P-touch labeler when you want to clear all saved label files, or in the event the P-touch labeler is not working properly.

1Turn off the machine and then while holding down g and R, press o to turn the machine back on.

2Release g and R.

The P-touch labeler turns on with the internal memory reset.

☞Release o before releasing the other keys.

☞All text, format settings, option settings and stored label files (except for the Auto Format templates), are cleared when you reset the P-touch labeler. Language and unit settings will also be cleared.

Troubleshooting

Problem	Cause	Solution
The screen ‘locks’, or the	Refer to Resetting the P-touch Labeler above and reset the internal
	memory to the initial settings. If resetting the P-touch labeler does not
P-touch labeler does not
	solve the problem, disconnect the AC adapter and remove the battery for
respond properly.
	more than 10 minutes.
	Is the AC adapter connected	Check that the AC adapter designed
		exclusively for your P-touch labeler
	correctly?
		is connected correctly.
		Make sure that you are using the
	Are you using the correct AC	AD-18 designed exclusively for
The display remains blank	adapter?	your P-touch labeler (included in
		package).
after turning on the
	Is the battery installed correctly?	Remove and re-install the battery.
power.
		The rechargeable battery pack’s
	Is the rechargeable battery pack	charge may be low. Charge the
		rechargeable battery pack. (The
	charged sufficiently? (for PT-7600
		rechargeable battery pack’s charge
	only)
		may run low even when you are not
		using the P-touch labeler.)

74