TROUBLESHOOTING
This section helps you resolve problems you may encounter while setting up or using the projector.
Power Indicator
| Indicator Condition |
| Projector Condition | Note | |
| Off |
| The main power is off. | – | |
|
|
|
|
|
|
Blinking light | Green |
| 0.5 sec On, | The projector is getting ready | Wait for a moment. |
|
|
| 0.5 sec Off | to turn on. |
|
| Orange |
| 0.5 sec On, | The projector is cooling down. | Wait for a moment. |
|
|
| 0.5 sec Off |
|
|
|
|
|
|
|
|
Steady light | Green |
| The projector is turned on. | – | |
| Orange |
| The projector is in Standby. | – | |
Status Indicator |
|
|
| ||
|
|
|
|
| |
| Indicator Condition |
| Projector Condition | Note | |
| Off |
| Normal | – | |
|
|
|
|
| |
Blinking light | Red |
| 1 cycle (0.5 sec On, | Lamp cover error or lamp | Replace the lamp cover or |
|
|
| 2.5 sec Off) | housing error | lamp housing correctly. |
|
|
| 2 cycle (0.5 sec On, | Temperature error | The projector is overheated. |
|
|
| 0.5 sec Off) |
| Move the projector to a cooler |
|
|
|
|
| location. |
|
|
|
|
|
|
|
|
| 4 cycle (0.5 sec On, | Fan error | Fans will not work correctly. |
|
|
| 0.5 sec Off) |
|
|
|
|
| 6 cycle (0.5 sec On, | Lamp error | Lamp fails to light. Wait a full |
|
|
| 0.5 sec Off) |
| minute and then turn on again. |
| Green |
| The projector is | ||
|
|
|
|
| |
Steady light | Orange |
| Control Panel key locked | You have pressed control | |
|
|
|
|
| panel key when Control Panel |
|
|
|
|
| Key Lock is enabled. |
|
|
|
|
| |
Lamp Indicator |
|
|
| ||
|
|
|
|
| |
| Indicator Condition |
| Projector Condition | Note | |
| Off |
| Normal | – | |
|
|
|
|
| |
Blinking light | Red |
| Lamp has reached its end of | Replace the lamp. | |
|
|
|
| life. Lamp replacement mes- |
|
|
|
|
| sage will be displayed. |
|
Steady light | Red |
| Lamp has been used beyond | Replace the lamp. | |
|
|
|
| its limit. The projector will not |
|
|
|
|
| turn on until the lamp is re- |
|
|
|
|
| placed. |
|
