Top Features
5 | 6 | 7 8 | 2 3 4 | 10 | 11 |
9 | 1 | 12 | 13 |
1.POWER Button (ON / STAND BY)( 
)
Use this button to turn the power on and off when the main power is supplied and the projector is in standby mode.
To turn on the projector, press and hold this button for a minimum of two seconds. To turn off the projector, press this button twice.
2.POWER Indicator
When this indicator is green, the projector is on; when this indicator is orange, it is in standby mode. See the Power Indicator section on page
3. STATUS Indicator
If this light blinks red rapidly, it indicates that an error has occurred, the lamp cover is not attached properly or the projector has over- heated. If this light remains orange, it indicates that you have pressed a cabinet key while the Control Panel Key Lock is enabled. See the Status Indicator section on page
4.LAMP Indicator
If this light blinks red rapidly, it's warning you that the lamp has reached the end of its usable life. After this light appears, replace the lamp as soon as possible (See page
5.VIDEO Button
Press this button to select a video source from a VCR, DVD player, laser disc player or document camera.
6.
Press this button to select an
7.RGB Button
Press this button to select an RGB source from computer or compo- nent equipment connected to your RGB port.
8.AUTO ADJ. Button
Use this button to adjust
9.Source Indicators
When one of the RGB, VIDEO or
10.MENU Button
Displays the menu.
11. SELECT GHFE / Volume Buttons
GH : Use these buttons to select the menu of the item you wish to adjust.
FE : Use these buttons to change the level of a selected menu item. A press of the Ebutton executes the selection. When no menus appear, these buttons work as a volume control.
12. ENTER Button
Executes your menu selection and activates items selected from the menu.
13. CANCEL Button
Pressing this button will return to the previous menu.
While you are in the main menu, pressing this button will close the menu.
