NEC VT46 user manual Part Names of the Projector

Part Names of the Projector

Controls (See page E-7)

Monaural Speaker (1W)
Lamp Cover (See page E-25)	Zoom Lever
Lamp Cover Screw	Focus Ring
	Lens
Ventilation (outlet)	Adjustable Tilt Foot Lever
Heated air is exhausted from here	(See page E-16)
Adjustable Tilt Foot Lever	Adjustable Tilt Foot
	(See page E-16)
(See page E-16)
	Lens Cap
Adjustable Tilt Foot (See page E-16)	Remote Sensor (See page E-9)

Remote Sensor (See page E-9)

Ventilation (inlet) / Filter Cover

Built-in Security Slot ( )*

Main Power Switch

When you plug the supplied power cable into an active wall outlet and turn on the Main Power switch, the POWER indicator turns orange and the projector is in standby mode. (See page E-15)

AC Input

Connect the supplied power cable's two- pin plug here, and plug the other end into an active wall outlet. (See page E-14)

*This security slot supports the MicroSaver® Security System. MicroSaver® is a registered trademark of Kensington Microware Inc. The logo is trademarked and owned by Kensington Microware Inc.

E-6