NEC VT46 user manual Whats in the Box?, Fire and Shock Precautions, Lamp Replacement

Fire and Shock Precautions

1.Ensure that there is sufficient ventilation and that vents are unob- structed to prevent the build-up of heat inside your projector. Allow at least 3 inches (10 cm) of space between your projector and a wall.

2.Prevent foreign objects such as paper clips and bits of paper from falling into your projector.

Do not attempt to retrieve any objects that might fall into your pro- jector. Do not insert any metal objects such as a wire or screwdriver into your projector. If something should fall into your projector, dis- connect it immediately and have the object removed by a qualified NEC service personnel.

3.Do not place any liquids on top of your projector.

4.Do not look into the lens while the projector is on. Serious damage to your eyes could result.

5.Keep any items such as magnifying glass out of the light path of the projector. The light being projected from the lens is extensive, there- fore any kind of abnormal objects that can redirect light coming out of the lens, can cause unpredictable outcome such as fire or injury to the eyes.

6.Do not cover the lens with the supplied lens cap or equivalent while the projector is on. Doing so can lead to melting of the cap and possibly burning your hands due to the heat emitted from the light output.

7.The projector is designed to operate on a power supply of 100-120 or 200-240 V 50/60 Hz AC. Ensure that your power supply fits this requirement before attempting to use your projector.

8.Handle the power cable carefully and avoid excessive bending. A damaged cord can cause electric shock or fire.

9.If the projector is not to be used for an extended period of time, disconnect the plug from the power outlet.

10.Do not touch the power plug during a thunderstorm. Doing so can cause electrical shock or fire.

What's in the Box?

Make sure your box contains everything listed. If any pieces are miss- ing, contact your dealer.

Please save the original box and packing materials if you ever need to ship your VT46 Projector.

Lens cap (24F38091)

Projector

			H
				N
				A
	n		CR2032V	P
				A
				J
	M		L	T S
		O2-Li C ELL
Remote control	Lithium battery
(7N900421)	(CR2032)

Power cable	RGB signal cable
(US:7N080206)	(7N520012)
(EU:7N080005)

CAUTION

1.Do not try to touch the ventilation outlet on the left side (when seen from the front) as it can become heated while the projector is turned on.

2.Do no use the tilt-foot for purposes other than originally intended. Misuses such as gripping the tilt-foot or hanging on the wall can cause damage to the projector.

3.Enable High-Speed Fan mode if you continue to use the projector for consecutive days. (From the menu, select [Advanced] → [High Speed Fan Mode].)

4.Do not unplug the power cable from the wall outlet under any one of the following circumstances.

Doing so can cause damage to the projector:

*While the Hour Glass icon appears.

*While the cooling fans are running. (The cooling fans continue to work for 60 seconds after the projector is turned off).

Lamp Replacement

•To replace the lamp, follow all instructions provided on page E-25.

•Be sure to replace the lamp when the message "The lamp has reached the end of its usable life. Please replace the lamp." appears. If you continue to use the lamp after the lamp has reached the end of its usable life, the lamp bulb may shatter, and pieces of glass may be scattered in the lamp case. Do not touch them as the pieces of glass may cause injury.

If this happens, contact your NEC dealer for lamp replacement.

•Allow a minimum of 60 seconds to elapse after turning off the pro- jector. Then turn off the main power switch, disconnect the power cable and allow 60 minutes to cool the projector before replacing the lamp.

Soft carrying case (24BS7201)

Connect		Important
Guide	Quick	Information

CD-ROM User’s manual

policyGuarantee

E-3