Brother PT-7500, PT-7600 manual Check the Number

Error Message		Cause	Solution
On 3/4" (18 mm) tape:	•	This message appears if you	• Reduce the number of lines
CHECK THE NUMBER		try to print or use the	or install a wider tape.
OF LINES! 5 MAX		Preview function when the
		number of lines in the text is
On 1/2" (12 mm) tape:		greater than the maximum
CHECK THE NUMBER		possible for the installed
OF LINES! 3 MAX		tape.
On 3/8" (9 mm) and 1/4"
(6 mm) tape:
CHECK THE NUMBER
OF LINES! 2 MAX
	•	This message appears if	• Select less than 1000 copies.
		more than 1000 copies were
CHOOSE COPIES		selected with the Print
		Option functions.
LESS THAN 1000!	•	Note the number of copies
		plus the number of
		sequential labels cannot
		exceed 1000.
	•	This message appears if the	• Release the tape cutter
		tape cutter button was	button. If pwas pressed,
		pressed when pwas
			press fto feed out any
CUTTER ERROR!		pressed or the tape was
		being fed.	printed tape.
			• If the problem cannot be
			corrected, contact your
			service representative.
	•	This message appears if a	• Change the Label Type
IMAGE CHARACTER		wide user-defined character	mode or use a tall user-
		image is entered when the	defined character image.
SIZE ERROR!
		Vertical Label Type mode
		is selected.
	•	This message appears if a	• Enter a letter between A and
INPUT ABCD AT		letter between A and D has not	D at the beginning and end
		been entered at the beginning	of the bar code data.
BEGIN & END!		and end of the bar code data
		when the CODABAR
		protocol is selected.
INSERT 1" TAPE	•	This message appears if a 1"	• Install a 1" (24-mm)-wide
		(24-mm)-wide tape cassette	tape cassette.
		is not installed when
		printing an Auto Format
INSERT 24mm TAPE		template created for 1" (24-
		mm)-wide tape.

78