Brother PT-7600, PT-7500 manual Block NO. Change

Error Message	Cause	Solution
	• The message appears when	• Press n to use the
	changing from a different	PANEL2 Label Type mode.	Appendix
	is different from the
		different Label Type mode.
BLOCK NO. CHANGE	Label Type mode to the	All text is cleared.
	PANEL2 Label Type mode
CLEAR TEXT?	and the current block number	• Press b to select a
	previously used block
	number.
	• This message appears if no	• Type in some text before
BUFFER EMPTY!	text has been typed in when	trying to perform any of
	you try to print or Preview	these operations.
	function.
	• This message appears if you	• Delete some existing text
	try to add a character, a	before trying to add any
	space, a new line, a new	more.
BUFFER FULL!	block, a symbol, an accented
	character or a bar code after
	the maximum number of
	characters has already been
	entered.
	• This message appears if less	• Enter a minimum of one
	than the minimum one digit	digit before pressing
	are entered as the bar code	n.
CHECK # OF	data.
DIGITS ENTERED!	• This message appears if the	• Input the correct number of
	required number of digits are	digits or change the bar code
	not entered in the bar code	protocol.
	data.
	• This message appears if a	• Replace the batteries with
	combination of new and	six new AA batteries of the
	used batteries, a combination	same type.
CHECK	of batteries of different types	• If rechargeable batteries are
	(alkaline and Ni-MH),	installed, recharge all
BATTERIES!
	manufacturers or models, or	batteries.
	a combination of recharged
	and uncharged batteries have
	been installed.
	• This message appears if you	• Select a different Label
	try to change the settings for	Type mode.
CHECK SETTING IN	the Length function or
	Frame function after a Label
LABEL TYPE MODE!
	Type mode with a preset
	label length or frame has
	already been selected.

77