Radio operation

Band selection

Press BND/SYS button repeatedly to select FM1, FM2, FM3, AM1, AM2. Display will show the wave band, frequency and preset station number if already stored.

Manual/Automatic tuning

Manual tuning: Press PREVIOUS/NEXT buttons on the panel or SEEK+/SEEK- buttons on the RC to select a station upward or downward step-by-step.

Automatic tuning: Press and hold for 3 seconds PREVIOUS/NEXT buttons on the panel or SEEK+/SEEK- buttons on the RC, the automatic search will start. It will play when finds the station.

Store function

You can store up to a total of 30 radio stations in the memory (18 FM, 12 AM).

To store a station:

-Select a band (if needed)

-Select a station with PREVIOUS/NEXT buttons on the panel or SEEK+/SEEK- buttons on the RC.

-Press and hold for 3 seconds a number button (1-6), under which you want to store the station.

To recall a station:

-Select a band (if needed)

-Press a number button (1-6) briefly to recall the stored station.

Preset scan function

Press AMS button to scan for 10 seconds each preset station in the memory of the current band. To stop preset scan, press this button again.

Auto memory store function

Press and hold for 2 seconds AMS button to enter auto store mode. The radio will automatically store the 6 strongest available stations to the 6 preset memories of the current band. To stop auto store, press AMS button.

Mono/Stereo selection

Press the AF/ST button to select the channel mode: MONO or STEREO. When Stereo reception is activated, “ST ON” appears on the display.