System setup menu

1.Press the SETUP button on the RC to display the system setup menu.

2.Use the LEFT/RIGHT cursor buttons on RC to select the desired menu: System setup, Language setup, Audio setup, Video setup, Speaker setup, Digital setup.

3.Press OK to enter it.

4.Use the UP/DOWN cursor buttons to select the desired setting.

5.Press RIGHT to enter the setting adjustment subwindow.

6.Press the UP/DOWN cursor buttons to select the option of the setting and press OK to confirm it.

System setup

TV system

This unit is suitable for all kinds of TV systems. You can select: Auto: the TV system is auto switched according to the disc system. NTSC: this system is used in USA, Taiwan, Japan etc.

PAL: this system is used in China, Europe, Hong Kong etc.

TV type

4:3 PS: When the unit connects to the normal TV set, the wide- screen image shows on the full screen, but some part is cut off.

4:3 LB: When the unit connects to the normal TV set, the wide-screen image shows and black bars appear on the top and bottom of screen.

16:9: Use this item when the unit is connected with the wide screen TV set.

Password

Here you can change the password. Insert your old password or 0000 (the general one). Insert the new password. Insert it again. Press OK button to save the new password.

Rating

The rating level is for parents to control playing content and protect your children from violence and erotic. The disc, the level of which is higher than the setting level cannot be played.

To change the parental control level you should enter the password (your or the general one: 0000).

Default

Reset to the initial factory setups.