SoundMax SM-CDM1032 instruction manual Detaching the control panel

Din rear-mount (method 2)

Installation using the screw holes at both sides of the unit.

1.Select a position where the screw holes of the main unit are fitted for aligned, and tighten the screws at 2 positions at each side.

Use either truss screws (5 x 8mm) or flush surface screws (4 x 8mm), depending on the shape of the screw holes in the bracket.

2.Screw

3.Factory radio mounting bracket.

4.Dashboard or Console

5.Hook (Remove this parts)

Note: The mounting box, outer trim ring, and the Half-sleeve are not used for this method of installation.

Detachable control panel
Detaching the control panel	Pic. 1

1.Press the OPEN button on the front panel. The

panel will go down (pic. 1). Pic. 2

5