Alpine CDA-7897 owner manual Installation, Removal

Page 47

Installation

Caution (CDA-7897 only)

Do not block the unit’s fan or heat sink, thus preventing air circulation. If blocked, heat will accumulate inside the unit and may cause a fire.

 

Air ventilation

 

hole

1

<Rear side>

Mounting Sleeve

 

 

(Included)

Dashboard

�

CDA-7998/CDA-7897

Slide mounting sleeve from main unit (see "Removal" on this page).

Slide the mounting sleeve into the dashboard.

No Pressure Here

Connect each input lead coming from an amplifier or equalizer to the corresponding output lead coming from the left rear of the CDA-7998/CDA-7897. Connect all other leads of the CDA-7998/CDA-7897 according to details described in the CONNECTlONS section.

3

Lock Pin

Slide the CDA-7998/CDA-7897 into the dashboard. When the unit is in place, make sure the locking pins are fully seated in the down position. This can be done by pressing firmly in on the unit while pushing the locking pin down with a small screwdriver. This ensures that the unit is properly locked and will not accidentally come out from the dashboard.

Removal

1Use a small screwdriver (or similar tool) to push the locking pins to the "up" position (see above drawing). As each pin is unlocked, gently pull out on the unit to make sure it does not re-lock before unlocking the second pin.

2Pull the unit out, keeping it unlocked as you do so.

< JAPANESE CAR >

No Pressure Here

2

Screw

 

Hex Nut (M5)

 

 

∗∗

 

Bolt Stud

Metal

 

Mounting

 

Strap

∗

 

CDA-7998/

Ground Lead

CDA-7897

 

Chassis

Reinforce the head unit with the metal mounting strap (not supplied). Secure the ground lead of the unit to a clean metal spot using a screw (∗) already attached to the vehicle's chassis.

NOTE

For the screw marked **, use an appropriate screw for the chosen mounting location.

Face Plate

Screws (M5 ⋅ 8)

CDA-7998/ (Included)

CDA-7897

Ground Lead

∗

Mounting Bracket

NOTE

Secure the ground lead of the unit to a clean metal spot using a screw (∗) already attached to the vehicle's chassis.

45-EN

Page 46 Page 48
Image 47
Page 46 Page 48
Contents CDA-7998/CDA-7897 CHA-1214CHM-S630 CHA-S634Contents XM Radio Operation Remote Control OperationCD Player Operation MP3 OperationPrecautions Never Attempt the Following Basic Operation CDA-7998 only Setting TimeAudio Mute Function Displaying TimeSelecting directly Equalizer PresetsAdjusting and Storing the Equalizer Curve → Flatoff ↔ Pops ↔ Rock ↔ News ←Crossover About the CrossoverCDA-7998 Adjusting and Storing the CrossoverTo store the adjusted contents WAY SystemExample 1. Listening Position Front Left Seat Recalling the Stored Crossover SettingsPress the T.CORR button to return to the normal mode About the Time CorrectionFront left-right Left front-rear Speakers Bass FocusExample 2. Listening Position All Seats Time Difference Table Example of Steps 2 and 3 SettingSetting the MX Mode Adjusting and Storing the Time CorrectionAbout Title and Text Blackout Mode On and OffQuick Searching Function Displaying the Title/TextElapsed Time Display Titling Discs/StationsErasing Disc Title/Station Title Switching the Display ModesDimmer Control CDA-7897 only Setup OperationSwitching the Tuner Mode Changing Lighting ColorSound Beep Guide Function Setting the Subwoofer OutputTurning Mute Mode On/Off Scroll SettingCDA-7897 only Setting the AUX Mode V-LinkConnecting to an External Amplifier Setting the Defeat Mode External InterruptDemonstration Adjusting Display Contrast CDA-7897 onlyOpening Message ON/OFF Setting CDA-7998 only Setting of Calendar Display Pattern Switching CDA-7998 only Switching the Animation Display type CDA-7998 onlyRadio Operation Manual TuningAutomatic Seek Tuning Manual Storing of Station PresetsTuning to Preset Stations Automatic Memory of Station PresetsPlayback To customers using CD-R/CD-RWCD Player Operation Opening and Closing the Movable displayOn handling Compact Discs CD/CD-R/ CD-RW Music Sensor SkipFast Forward and Backward Repeat Play→ M.I.X. → ALL M.I.X. → off X. Random PlayScanning Programs Controlling CD Changer OptionalMulti-Changer Selection → CD CHANGER∗ → Tuner ∗ Only when the CD changer is connectedPlaying MP3 Files Playing MP3 Files with the CD Changer OptionalFile Search Selecting FoldersAbout MP3 Setting the Range of MP3 File SelectionMP3 Operation Playing MP3 DataTerminology Checking the XM Radio ID Number Storing XM Channel PresetsXM Radio Operation Receiving XM Channels with the XM Receiver OptionalChanging the Display Receiving Stored XM ChannelsCategory Search About i-Personalize Personalize Operation CDA-7998 onlyData Downloading Incoming Calls Telephone Mode ON/OFFMobileHub Link OperationOption About MobileHub LinkCalling Short Mail Operation Controls on Remote Control Remote Control OperationBattery Replacement MEMORY1 Operating the Audio ProcessorRecalling StepsRadio InformationCase of Difficulty BasicIndication for CD Changer Indication for CD PlayerIndication for XM Radio Mode SpecificationsPrecautions Installation and ConnectionsRemoval InstallationTo prevent external noise from entering the audio system ConnectionsLow frequency range System whose frequency range is divided betweenPage ALPINE-1 Damage during shipment

CDA-7897 specifications

The Alpine CDA-7897 is a versatile and high-performance CD receiver that appeals to audiophiles and casual listeners alike. Renowned for its rich feature set and exceptional sound quality, the CDA-7897 is designed to enhance the in-car audio experience.

One of the standout features of the CDA-7897 is its direct connectivity options. The unit offers multiple inputs, including a front auxiliary input and USB connectivity for playing digital music files. This allows users to easily connect their smartphones or MP3 players directly to the receiver, ensuring that their favorite tunes are always within reach. The receiver is also compatible with Alpine's full-speed iPod connection, which allows for seamless control and playback of iPod music.

The CDA-7897 boasts impressive sound processing capabilities. Its built-in 24-bit digital-to-analog converter (DAC) offers superior audio clarity and fidelity, ensuring that even the most intricate details in music are faithfully reproduced. Additionally, the unit features extensive tuning options, including a 3-band parametric EQ and adjustable crossover settings, allowing users to customize their audio output to their liking. The included built-in amplifier provides a robust 50 watts per channel, delivering powerful sound that fills the car with rich, dynamic audio.

Another noteworthy aspect of the CDA-7897 is its sleek and user-friendly design. The receiver features a stylish front panel with a detachable faceplate for added security. The intuitive interface allows for easy navigation through menus and options, making it simple for users to adjust settings while on the road.

In terms of expandability, the CDA-7897 offers several options for enhancing your audio system. It includes preamp outputs for additional amplifiers and speakers, allowing users to build a more powerful setup over time. The unit also supports a variety of audio formats, including MP3 and WMA, ensuring playback compatibility across different music libraries.

Overall, the Alpine CDA-7897 is a feature-rich CD receiver that combines high-quality audio performance with modern connectivity options. Its blend of technology, customization, and user-friendly design solidifies its place as a top choice for car audio enthusiasts seeking an engaging listening experience. Whether cruising down the highway or parked at a gathering, the CDA-7897 delivers an impressive audio performance that elevates any journey.
Top Page Image Contents