Alpine CDA-7897 owner manual Basic Operation

Page 7

Basic Operation

POWER RESET

c ANGLE 89

Initial System Start-Up

Be sure to press the RESET switch when using the unit for the first time, after installing the CD changer, etc., or after changing the car battery.

1 Make sure that the power of the unit is off. If the power is on, press and hold the POWER button for at least 3 seconds to turn off the unit.

2 Press the RESET switch with a ball-point pen, or any other pointed object.

RESET

Opening the Front Panel

1 Press the Open button on the Front Panel.

Open Button

NOTE

The display will close a half minute after the ignition key is turned to the OFF position.

Hiding the Front Panel

1 Press and hold the c button on the Front Panel for at

least 3 seconds.

NOTES

The Front Panel will stop moving if there is an obstacle inside the compartment. In that case, remove the obstacle and press and hold the c button again for at least 3 seconds.

The display will close shortly after the ignition key is turned to the OFF position.

Turning Power On and Off

1 Press the POWER button to turn on the unit.

NOTE

The unit can be turned on by pressing any other button except the eject c button, Rotary encoder and CLK button (CDA-7897 only).

The volume level gradually increases to the previous level you were listening to before the unit was turned off. Press and hold the POWER button for at least 3 seconds to turn off the unit.

NOTE

The first time power is turned on, the volume will start from level 12.

Display Angle Adjustment

Movable display

The movable display may be adjusted to 3 different angles depending upon user preference.

1 Press the ANGLE 89 button to adjust the angle of the movable display.

NOTES

The display will close a half minute after the ignition key is turned to the OFF position.

The adjusted angle of the display is stored in memory. There is no need to re-adjust the angle when the power is turned back on.

CAUTION

Keep hands (or any other object) away from the display while it is opening or closing to avoid damage or injury. The back of the movable display will get very warm under normal operating conditions. This is not a malfunction. Do not touch.

5-EN

Image 7
Contents CDA-7998/CDA-7897 CHA-1214CHM-S630 CHA-S634Contents XM Radio Operation Remote Control OperationCD Player Operation MP3 OperationPrecautions Never Attempt the Following Basic Operation CDA-7998 only Setting TimeAudio Mute Function Displaying TimeSelecting directly Equalizer PresetsAdjusting and Storing the Equalizer Curve → Flatoff ↔ Pops ↔ Rock ↔ News ←Crossover About the CrossoverCDA-7998 Adjusting and Storing the CrossoverTo store the adjusted contents WAY SystemExample 1. Listening Position Front Left Seat Recalling the Stored Crossover SettingsPress the T.CORR button to return to the normal mode About the Time CorrectionExample 2. Listening Position All Seats Bass FocusFront left-right Left front-rear Speakers Time Difference Table Example of Steps 2 and 3 SettingSetting the MX Mode Adjusting and Storing the Time CorrectionAbout Title and Text Blackout Mode On and OffQuick Searching Function Displaying the Title/TextElapsed Time Display Titling Discs/StationsErasing Disc Title/Station Title Switching the Display ModesDimmer Control CDA-7897 only Setup OperationSwitching the Tuner Mode Changing Lighting ColorSound Beep Guide Function Setting the Subwoofer OutputTurning Mute Mode On/Off Scroll SettingCDA-7897 only Setting the AUX Mode V-LinkConnecting to an External Amplifier Setting the Defeat Mode External InterruptOpening Message ON/OFF Setting CDA-7998 only Adjusting Display Contrast CDA-7897 onlyDemonstration Setting of Calendar Display Pattern Switching CDA-7998 only Switching the Animation Display type CDA-7998 onlyRadio Operation Manual TuningAutomatic Seek Tuning Manual Storing of Station PresetsTuning to Preset Stations Automatic Memory of Station PresetsPlayback To customers using CD-R/CD-RWCD Player Operation Opening and Closing the Movable displayOn handling Compact Discs CD/CD-R/ CD-RW Music Sensor SkipFast Forward and Backward Repeat Play→ M.I.X. → ALL M.I.X. → off X. Random PlayScanning Programs Controlling CD Changer OptionalMulti-Changer Selection → CD CHANGER∗ → Tuner ∗ Only when the CD changer is connectedPlaying MP3 Files Playing MP3 Files with the CD Changer OptionalFile Search Selecting FoldersAbout MP3 Setting the Range of MP3 File SelectionMP3 Operation Playing MP3 DataTerminology Checking the XM Radio ID Number Storing XM Channel PresetsXM Radio Operation Receiving XM Channels with the XM Receiver OptionalCategory Search Receiving Stored XM ChannelsChanging the Display Data Downloading Personalize Operation CDA-7998 onlyAbout i-Personalize Incoming Calls Telephone Mode ON/OFFMobileHub Link OperationOption About MobileHub LinkCalling Short Mail Operation Controls on Remote Control Remote Control OperationBattery Replacement MEMORY1 Operating the Audio ProcessorRecalling StepsRadio InformationCase of Difficulty BasicIndication for CD Changer Indication for CD PlayerIndication for XM Radio Mode SpecificationsPrecautions Installation and ConnectionsRemoval InstallationTo prevent external noise from entering the audio system ConnectionsLow frequency range System whose frequency range is divided betweenPage ALPINE-1 Damage during shipment

CDA-7897 specifications

The Alpine CDA-7897 is a versatile and high-performance CD receiver that appeals to audiophiles and casual listeners alike. Renowned for its rich feature set and exceptional sound quality, the CDA-7897 is designed to enhance the in-car audio experience.

One of the standout features of the CDA-7897 is its direct connectivity options. The unit offers multiple inputs, including a front auxiliary input and USB connectivity for playing digital music files. This allows users to easily connect their smartphones or MP3 players directly to the receiver, ensuring that their favorite tunes are always within reach. The receiver is also compatible with Alpine's full-speed iPod connection, which allows for seamless control and playback of iPod music.

The CDA-7897 boasts impressive sound processing capabilities. Its built-in 24-bit digital-to-analog converter (DAC) offers superior audio clarity and fidelity, ensuring that even the most intricate details in music are faithfully reproduced. Additionally, the unit features extensive tuning options, including a 3-band parametric EQ and adjustable crossover settings, allowing users to customize their audio output to their liking. The included built-in amplifier provides a robust 50 watts per channel, delivering powerful sound that fills the car with rich, dynamic audio.

Another noteworthy aspect of the CDA-7897 is its sleek and user-friendly design. The receiver features a stylish front panel with a detachable faceplate for added security. The intuitive interface allows for easy navigation through menus and options, making it simple for users to adjust settings while on the road.

In terms of expandability, the CDA-7897 offers several options for enhancing your audio system. It includes preamp outputs for additional amplifiers and speakers, allowing users to build a more powerful setup over time. The unit also supports a variety of audio formats, including MP3 and WMA, ensuring playback compatibility across different music libraries.

Overall, the Alpine CDA-7897 is a feature-rich CD receiver that combines high-quality audio performance with modern connectivity options. Its blend of technology, customization, and user-friendly design solidifies its place as a top choice for car audio enthusiasts seeking an engaging listening experience. Whether cruising down the highway or parked at a gathering, the CDA-7897 delivers an impressive audio performance that elevates any journey.