Aiwa 570CDCMP3 manual CD Play, Switching modes

CD PLAY

You can play a CD, CD-R, or CD-RW by following the procedure below.

1 Press OPEN to open the front panel, then insert a CD with the labeled side upward to start CD play.

z(eject) button

2 Close the front panel.

The track number and elapsed playing time will be displayed.

Elapsed

Track number playing time CD indicator

CD operation indicator

3 Adjust the volume with the Jog Dial.

Notes

•If a CD is already inserted, press FUNCTION repeatedly to select CD Play mode to start CD play.

•Be sure to close the front panel after inserting or ejecting a CD.

Button operations in CD Play mode

Press To

zEject a CD.

tSkip to the next track with a short press (for less than 0.5 second).

Each extra press skips forward one extra track.

To search forward rapidly, press and hold t until the desired part is played, then release it.

rRestart the track currently in play with a short press (for less than 0.5 second). Each extra press skips backward one extra track.

To search backward rapidly, press and hold r until the desired part is played, then release it.

Switching modes

When the unit is in a mode other than CD Play mode, inserting a CD switches the unit to CD Play mode automatically.

Notes

•Smaller 3-inch (8-cm) CDs cannot be played on this unit. And do not use an adaptor, as it may cause a malfunction.

•When you insert a CD, CD play starts with the first track on the CD. In other cases (when switching from the radio operation or turning on the unit), CD play starts at the point on the CD where it had stopped previously.

•When you insert a CD-R/CD-RW, it may take longer to start playing.

•A CD-R/CD-RW cannot be played if it contains no data or data in the wrong format, etc. In those cases, the indication “ERROR03” appears.

continued

ENGLISH 10