Aiwa 570CDCMP3 manual Dssa Drivers Sound Stage Adjustment, Source Level Adjuster

DSSA (Drivers Sound Stage

Adjustment)

You can adjust the sound stage and tone balance to best serve a particular seat in the car.

1 Press SELECT repeatedly to select DSSA (Drivers Sound Stage Adjustment) mode.

Source Level Adjuster

You can adjust the output level in each mode to equalize the volume level.

1 Press FUNCTION repeatedly to select the desired mode.

2 Press DISP while pressing SELECT.

The “LEVEL 0” indication appears.

2 Rotate the Jog Dial to select the position of sound stage.

Sound stage changes as follows.

↓

OFF ↔

For the front left seat ↔

For the front right seat

−

Note

When DSSA is activated, you cannot adjust BAL (balance), FAD (fader), BASS and TRE (treble) modes.

3 Rotate the Jog Dial to adjust the level.

Rotate clockwise to increase the output level. Rotate counterclockwise to decrease the output level.

If you do not operate the Jog Dial within 5 seconds, this function is canceled, and the indication returns to the current source mode.

Returning to the factory settings

Adjusted settings of VOL, BASS, TRE, BAL, FAD, H-BASS, DSSA, and source level can be returned to the factory settings with a simple operation.

1 With the unit off, press and hold DISP for more than 2 seconds.

The “LEVEL--” indication appears, and all sound settings are returned to the factory

settings.

ENGLISH 14