Alpine HDA-5460 operating instructions Indication for CD Player, 33-EN

Page 33

CD

CD Player/Changer not functioning.

•Out of operating temperature range +50˚C (+120˚F) for CD. - Allow the vehicle's interior (or trunk) temperature to cool.

CD playback sound is wavering.

•Moisture condensation in the CD Module.

-Allow enough time for the condensation to evaporate (about 1 hour).

CD insertion not possible.

•A CD is already in the CD player.

-Eject the CD and remove it.

•The CD is being improperly inserted.

-Make sure the CD is being inserted following instructions in the CD Player Operation section.

Unable to fast forward or backward the CD.

•The CD has been damaged.

-Eject the CD and discard it; using a damaged CD in your unit can cause damage to the mechanism.

CD playback sound skips due to vibration.

•Improper mounting of the unit.

-Securely re-mount the unit.

•The disc is very dirty.

-Clean the disc.

•The disc has scratches.

-Change the disc.

•The pick-up lens is dirty.

-Do not use a commercial available lens cleaner disc. Consult your nearest ALPINE dealer.

CD playback sound skips without vibration.

•The disc is dirty or scratched.

- Clean the disc; damaged disc should be replaced.

Error displays (built-in CD player only)

•Mechanical error

-Press c. After the error indication disappears, insert the disc again. If the above-mentioned solution does not solve the problem, consult your nearest ALPINE dealer.

CD-R/CD-RW playback not possible

•Close session (finalization) has not been performed. - Perform finalization and attempt playback again.

MP3/WMA

MP3 or WMA is not played back.

•Writing error occurred. The CD format is not compatible.

-Make sure the CD has been written in a supported format. Refer to “About MP3/WMA” (page 12-13), then rewrite in the format supported by this device.

Indication for CD Player

HIGH-TEMP

 

HI TEMP

 

 

 

(CDA-9831)(CDA-9830)

•Protective circuit is activated due to high temperature.

-The indicator will disappear when the temperature returns to within operation range.

NO DISC

•No CD is inserted.

-Insert a CD.

•Although a disc is inserted, “NO DISC” is displayed and the unit does not start to play or eject the disc.

-Remove the disc by following these steps:

1)Press the c button.

The movable display will open.

2)Press the c button again for at least 2 seconds while the movable display is open.

ERROR

•Mechanism error.

1)Press the c button and eject the CD.

If not ejecting, consult your Alpine dealer.

2)When the error indication remains after ejecting, press the c button again.

If the error indication still does not turn off after pressing the c button for a few times, consult your Alpine dealer.

•When “ERROR” is displayed:

If the disc cannot be ejected by pressing c, press the RESET switch (refer to page 6) and press c again.

If the disc still cannot be ejected, consult your Alpine dealer.

PROTECT

•A copy-protected WMA file was played back.

- You can only play back non-copy-protected files.

UNSUPPORT UNSUPORT

(CDA-9831)(CDA-9830)

•The disc is not written in a MP3/WMA supported format. - Use a disc written at the MP3/WMA supported format.

33-EN

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Contents Installation and Connections Operating Instructions Product Cleaning Alphanumeric Display AlphanumericDisplay Getting Started Lowering Volume Quickly Adjusting VolumeChanging the Display Type Detaching and Attaching the Front PanelRadio CD / MP3 / WMA Frequency Search FunctionPlayback 10-EN Playing back a PlaylistRepeat Play Press 5 in the play or pause modeX. Random Play 11-ENSearching from CD Text Scanning ProgramsFile/Folder Name Search Concerning MP3/WMA Quick Search13-EN TerminologySound Setting Recalling the Stored built-in Crossover Settings14-EN Adjusting and Storing the Equalizer Curve Equalizer PresetsRecalling the Stored Equalizer Curve 15-ENBass Focus About Time CorrectionExample 1. Listening Position Front Left Seat Example 2. Listening Position All Seats17-EN Example setting for steps 4Setting the MX Mode Adjusting and Storing the Time CorrectionPress BAND/TEL. to select a speaker to be adjusted Press Rotary encoder to return to normal modeOther Functions About the indicator displayDisplaying the Title/Text 19-ENTitling Discs/Stations Blackout Mode On and OffErasing Disc Title/Station Title Displaying TimeDisplaying the External Amplifier Information CDA-9831 only To set the Bass VolumeTo set the Amplifier 21-ENVerifying the Software Version Setting the Multicolor Illumination CDA-9831 onlyIf you want to use colors other than the above 22-ENData Downloading About i-Personalize23-EN File name of download data shall be AW*****.MP3Sound Customizing Visual Customizing24-EN 25-EN External DeviceXM Radio Optional Storing XM Channel PresetsReceiving XM Channels with the XM Receiver Optional Checking the XM Radio ID NumberSetting the Auxiliary Data Field Display Setting the Tuning MethodChannel/Category Search Function Quick Search FunctionSetting the Automatic Calling Telephone Mode ON/OFFAbout MobileHub Link Incoming CallsCalling by using the Speed Dial SMS Short Message Service OperationCalling Calling by the address bookControlling CD Changer Optional Changer OptionalPlaying MP3 Files with the CD Changer Optional Multi-Changer Selection OptionalControls on Remote Control Remote ControlOperating the Audio Processor 31-ENInformation Battery ReplacementCase of Difficulty Basic33-EN Indication for CD PlayerIndication for XM Radio Mode Indication for CD Changer34-EN 35-EN Specifications36-EN Installation and Connections37-EN InstallationRemoval Slide the mounting sleeve into the dashboard38-EN ConnectionsTo prevent noise/interference in the audio system 39-ENALPINE-1 Limited Warranty
Top Page Image Contents