Alpine HDA-5460 operating instructions 39-EN, To prevent noise/interference in the audio system

Page 39

1Amplifier Link Connector

Outputs Amplifier Link control signals. Connect this to a separately sold Amplifier Link-compatible amplifier, using the (also separately sold) Amplifier Link box KCE-510M.

2Antenna Receptacle

3Power Antenna Lead (Blue)

Connect this lead to the +B terminal of your power antenna, if applicable.

This lead should be used only for controlling the vehicle's power antenna. Do not use this lead to turn on an amplifier, or a signal processor, etc.

4Remote Turn-On Lead (Blue/White)

Connect this lead to the remote turn-on lead of your amplifier or signal processor.

5Audio Interrupt In Lead (Pink/Black)

6Illumination Lead (Orange) (CDA-9831 only)

This lead may be connected to the vehicle's instrument cluster illumination lead. This will allow the backlighting of the CDA-9831 to dim whenever the vehicle's lights are turned on.

7Switched Power Lead (Ignition) (Red)

Connect this lead to an open terminal on the vehicle's fuse box or another unused power source which provides (+)12V only when the ignition is turned on or in the accessory position.

8Battery Lead (Yellow)

Connect this lead to the positive (+) post of the vehicle's battery.

9Ground Lead (Black)

Connect this lead to a good chassis ground on the vehicle. Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided.

!Choke Coil with Fuse Holder

(10A)

"Power Supply Connector

#Right Front (+) Speaker Output Lead (Gray)

$Right Front (–) Speaker Output Lead (Gray/Black)

%Right Rear (–) Speaker Output Lead (Violet/Black)

&Right Rear (+) Speaker Output Lead (Violet)

(Left Rear (+) Speaker Output Lead (Green)

)Left Rear (–) Speaker Output Lead (Green/Black)

~Left Front (–) Speaker Output Lead (White/Black)

+Left Front (+) Speaker Output Lead (White)

,Ai-NET Connector

Connect this to the output or input connector of another device (CD Changer, Equalizer, etc.) equipped with Ai-NET.

You can input TV/video sound by connecting an optional Ai- NET/RCA Interface cable (KCA-121B) to this component.

-Ai-NET Cable (Included with CD Changer)

.Front Output RCA Connectors

RED is right and WHITE is left.

/Rear Output RCA Connectors

RED is right and WHITE is left.

:Subwoofer RCA Connectors

RED is right and WHITE is left.

;RCA Extension Cable (sold separately)

<System Switch

When connecting a processor or divider using Ai-NET, place this switch in the EQ/DIV position. When no device is connected, leave the switch in the NORM position.

Be sure to turn the power off to the unit before changing the switch position.

To prevent noise/interference in the audio system.

•Locate the unit and route the leads at least 10 cm away from the car harness.

•Keep the battery power leads as far away from other leads as possible.

•Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.

•If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise suppressors, contact them for further information.

•Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.

39-EN

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Contents Installation and Connections Operating Instructions Product Cleaning Alphanumeric Display AlphanumericDisplay Getting Started Detaching and Attaching the Front Panel Adjusting VolumeLowering Volume Quickly Changing the Display TypeRadio CD / MP3 / WMA Frequency Search FunctionPlayback 10-EN Playing back a Playlist11-EN Press 5 in the play or pause modeRepeat Play X. Random PlayQuick Search Scanning ProgramsSearching from CD Text File/Folder Name Search Concerning MP3/WMA13-EN TerminologySound Setting Recalling the Stored built-in Crossover Settings14-EN 15-EN Equalizer PresetsAdjusting and Storing the Equalizer Curve Recalling the Stored Equalizer CurveExample 2. Listening Position All Seats About Time CorrectionBass Focus Example 1. Listening Position Front Left Seat17-EN Example setting for steps 4Press Rotary encoder to return to normal mode Adjusting and Storing the Time CorrectionSetting the MX Mode Press BAND/TEL. to select a speaker to be adjusted19-EN About the indicator displayOther Functions Displaying the Title/TextDisplaying Time Blackout Mode On and OffTitling Discs/Stations Erasing Disc Title/Station Title21-EN To set the Bass VolumeDisplaying the External Amplifier Information CDA-9831 only To set the Amplifier22-EN Setting the Multicolor Illumination CDA-9831 onlyVerifying the Software Version If you want to use colors other than the aboveFile name of download data shall be AW*****.MP3 About i-PersonalizeData Downloading 23-ENSound Customizing Visual Customizing24-EN 25-EN External DeviceChecking the XM Radio ID Number Storing XM Channel PresetsXM Radio Optional Receiving XM Channels with the XM Receiver OptionalQuick Search Function Setting the Tuning MethodSetting the Auxiliary Data Field Display Channel/Category Search FunctionIncoming Calls Telephone Mode ON/OFFSetting the Automatic Calling About MobileHub LinkCalling by the address book SMS Short Message Service OperationCalling by using the Speed Dial CallingMulti-Changer Selection Optional Changer OptionalControlling CD Changer Optional Playing MP3 Files with the CD Changer Optional31-EN Remote ControlControls on Remote Control Operating the Audio ProcessorBasic Battery ReplacementInformation Case of Difficulty33-EN Indication for CD PlayerIndication for XM Radio Mode Indication for CD Changer34-EN 35-EN Specifications36-EN Installation and ConnectionsSlide the mounting sleeve into the dashboard Installation37-EN Removal38-EN ConnectionsTo prevent noise/interference in the audio system 39-ENALPINE-1 Limited Warranty
Top Page Image Contents