Connections
•Basic Connection
Power supply unit
Cable Color | Cable Specifications | |
|
|
|
|
| • Video output connector |
Yellow | Outputs a video signal. | |
|
| Connects to the video input of the TV monitor you are linking with. |
•There is a copy protect signal included in the video output signal, so that recording with a VCR (Video Cassette Recorder) etc., is not possible.
Also, depending on the monitor, the picture may not be displayed correctly.
•IONBUS terminal
Connects with IONBUS compatible products.
•S video output terminal Outputs a video signal.
Connects with ALPINE products with a S video input terminal.
•DVD Audio Link terminal
Connects with the DVD Audio Link terminal of the
(Connect when using a DVD audio disc. Remove the terminal cover and plug in the DVD Audio Link cable).
•Antenna Receptacle
Blue | • Power Antenna Lead |
| Connect this lead to the +B terminal of your power antenna, if applicable. |
•Illumination Lead
Orange |
| This lead may be connected to the vehicle’s instrument cluster illumination lead. | |||
|
|
|
|
| This will allow the backlighting of the |
|
|
|
|
| lights are turned on. |
|
|
|
|
|
|
Black | • | Ground Lead | |||
| Connect this lead to a good chassis ground on the vehicle. Make sure the | ||||
|
|
|
|
| connection is made to bare metal and is securely fastened using the sheet metal |
|
|
|
|
| screw provided. |
|
|
|
|
| |
Red | • Switched Power Lead (Ignition) | ||||
| Connect this lead to an open terminal on the vehicle’s fuse box or another unused | ||||
|
|
|
|
| power source which provides (+)12V only when the ignition is turned on or in the |
|
|
|
|
| accessory position. |
|
|
|
|
|
|
Yellow | • | Battery Lead | |||
| Connect this lead to the positive (+) post of the vehicle’s battery. | ||||
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
|
Fuse
(7.5A)
NOTES
•Do not install the power supply unit where it will be exposed to moisture such as under the floor mat or near the air conditioner. This may cause a malfunction.
•Do not bundle the power supply unit cable with the audio cables. Noise may be induced into your system.
•The power supply unit temperature can become hot. This is not a malfunction.