Control Panel
•The switches are mounted on the upper right side of the visor (Fig. 1 - E).
The numbers and symbols have the following meanings (from left to right):
DF 6260 - CHDF 6260 | DF 6160 - DF |
= | Continuously variable | 1 | = | fan set 1 | |
| fan control | 2 | = | fan set 2 | |
= | Intensive setting | 3 | = | fan set 3 | |
4 | = | fan set 4 | |||
|
| ||||
= | Light |
| = | Light | |
= | Light OFF |
| = | Light OFF | |
= | Light ON |
| = | Light ON |
The fan is controlled by moving the sliding switch.
The extractor part (visor) of the hood is used to switch the fan on and off when the appliance is switched on (Motor).
When the visor of the appliance is withdrawn, the fan automatically switches on.
If the visor is pushed in without operating the switches, the fan is switched off.
The lighting can be separately switched on and off with the slide switch.
Turn the hood on a few minutes before you start cooking then you will get an underpressure in the kitchen. It should be left on after cooking for about 15 minutes or until all odours have disappeared.
63
