AEG DF6260-ML/1, DF 6160, DF 6260 Installation, Preparing the wall unit - Extractor version

Fig. 5

Installation

Preparing the wall unit - Extractor version

•The hood is supplied as an

extractor unit.	190	172
Before installing the hood, drill a		238
hole in the roof of the wall unit
(see item. 5). This hole is to allow
passage of the outlet pipe and the
power cable, and to facilitate
servicing.

•The wall unit must have a minimum body depth (without

door) of 300 mm with recessed light screen and min. 370 mm with

flush-mounted light screen. The unobstructed internal height must be at least 370 mm.

Preparing the wall unit - Filter version (DF 6160)

•Before installation of the hood in the wall unit, a 115x115 mm hole for the deflector should be cut in the ceiling of the wall unit. Fig. 6-7.

•Depending on the wall unit height, you need for return air operation a pipe union or additionally a non-flammable length of pipe (Ø 100/115/ 120 mm) as far as the ceiling of the wall unit.

Fig. 6

Fig. 7

71