Alpine IVA-D100 owner manual If a menu screen appears, 19-EN, Direct Menu Operations

Page 23

Caution

Not all functions will operate for every DVD. See the individual DVD’s instructions for details on the features supported.

Fingerprints on a disc may adversely affect playback. If a problem occurs, remove the disc and check for fingerprints on the playback side. Clean the disc if necessary.

If you switch the power or Ignition Key OFF or change sources during playback, playback will continue where you left off when you resume playback.

If you try to perform an invalid operation (based on the type of disc being played), the following mark is displayed on the monitor screen:

Play Position Memory Function

Even if you turn power off or switch the Ignition Key to OFF during playback or change the source, playback will continue from the point where playback stopped when the power is turned ON again.

1Press SOURCE/POWER.

The source selection screen is displayed.

2Touch [] of DVD PLAYER.

The display shows the DVD player mode screen.

Insert a disc with the label side facing up. The unit starts to play the disc.

When an optional Alpine DVD player is connected: Insert a disc into the DVD/video CD/CD player, the player starts playing.

The operation screen changes to the visual screen in the DVD or video CD mode for 5 seconds after an operation has been performed. Touch the display panel to display the operation screen again.

The display mode can be changed by touching [WIDE]. For operation, see “Switching Display Modes” on page 26.

To eject the disc

Press .

The reverse side of a double-sided DVD will not be played automatically.

Remove the disc, turn it over, and reinsert it.

If the disc does not eject, press and hold for at least 2 seconds.

DO NOT insert discs containing maps for the navigation system. Doing so could result in damage.

Refer also to “DVD Setup” (pages 28 to 32).

Be sure the remote input lead is connected to the remote output lead of this unit when a DVD changer or DVD player is connected. If not correctly connected, touch operation cannot be performed.

To return to the previous screen during video CD playback, touch [RTN] after touching [PAGE1/2] of the function guide. However, the function may vary depending on the disc.

If the disc is left in the unit after pressing, the disc is automatically pulled back into the unit and stopped. In this case, start playback by

touching [/ ] or eject again and remove the disc within 15 seconds.

If a menu screen appears

On DVDs and Video CDs with playback control (PBC), menu screens may appear automatically. If this happens, perform the operation described below to start playback.

To play back a DVD-Audio disc, set “VCAP” in “Setting the DVD- Audio Playback Mode” (page 32).

Direct Menu Operations

1Touch the DVD menu directly.

Some operations cannot be performed depending on the disc.

Menu Operations

1Touch [KEY].

The menu operation mode will be displayed.

Touch [MENU RTN] to return to the previous display. (Operation may not be possible, depending on the disc.)

2Select a desired menu item by touching [], [], [ ] or [].

3Touch [ENT] to confirm the selected item.

19-EN

Image 23
Contents IVA-D100 CHA-1214CHM-S630 CHA-S634IVA-D100 Alpine CD Changers Give You More Contents Operating Instructions Other Useful Features TCR PrecautionsOperating Instructions Precautions CD single Mark logoDisc size Video CDALL Using DVD-Rs/DVD-RWs/DVD+Rs/DVD+RWs Location of Controls Accessory ListGetting Started 10-EN Turning Power On or OffInitial System Start-Up Opening/Closing the MonitorMoving the Monitor to be Flat Adjusting the VolumeLowering Volume Quickly How to view the DisplayTouch of Radio About the GlideTouch bar12-EN 13-EN RadioListening to the Radio Displaying the Numeric Keypad Input ScreenTuning to Preset Stations Setting Analog Mode HD Radio mode onlyManual Storing of Station Presets Automatic Memory of Station Presets15-EN PlaybackAbout MP3/WMA Repeat PlayX. Random Play Selecting Folders concerning MP3/ WMATerminology 17-EN18-EN To display the DVD mode screenDVD/Video CD Playing a DiscMenu Operations If a menu screen appears19-EN Direct Menu OperationsStopping Playback PRE Stop Searching by ProgramSearching by Playlist Slow Motion Playback Playing Still Frames PausingStopping Playback Fast-forwarding/Fast-reversing22-EN Selecting Program SkipSelecting Playlist Skip Repeat Playback23-EN Switching the AngleSwitching the Audio Tracks Scroll to Move the Page Forward or Back24-EN Switching from the disc menuDisplaying the Disc Status for DVD/Video Setting the Loudness Other Useful FeaturesAdjusting the Audio Press Setup26-EN Switching Display ModesSearch Function Rear Selection FunctionCancelling the Simultaneous Function Switching the Visual Source Only Simultaneous FunctionBlackout Mode On and Off Setting rear Camera InterruptionDVD Setup Operation Monitor SettingSetup Monitor Setting OperationChanging the Country Code Setting Setting of the Menu LanguageSetting of the Audio Language Setting of the Subtitle Language30-EN Setting the Rating Level Parental LockChanging the Digital Output Setting Touch the input screen to enter a new 4-digit password31-EN Setting the DVD-Audio Playback Mode Setting the Downmix ModeSetting the TV Screen Setting Setting of the Bonus CodeGeneral Setup Operation System Setup Operation Setting the Navigation Interruption Setting the External Device Interrupt ModeSetting the Navigation Mode Setting the AUX ModeSetting the Digital Output Display Setup OperationSetting the Picture Output Setting the Visual ButtonSetting Automatic Background Textures Setting the Brightness of the BacklightingAdjusting the Minimum Level of Backlight Switching Background TexturesAdjusting Color of Picture Visual EQ Setting OperationSelecting the Visual EQ Mode Maker’s setting Adjusting BrightnessDownloading the Background data Adjusting Tint of PictureAdjusting Image Contrast Adjusting Picture Quality40-EN Adjustment Procedure for Dolby Surround41-EN Setting the SpeakersSet MX Mode of the External Audio Processor Over Adjustment42-EN Performing Time Correction Manually TCR43-EN Phase SwitchingGraphic Equalizer Adjustments Parametric Equalizer AdjustmentsSetting Bass Focus Setting Bass Sound ControlSpeaker Setup Setting Bass CompressorAdjusting the speaker levels Output Level Setting of Dolby DigitalAdjusting the acoustic image BI-PHANTOM Achieving powerful high volume soundUsing the Pro Logic II Mode Adjusting the DVD LevelStoring Settings in the Memory Recalling the Preset Memory47-EN Linear PCM SettingSwitching the Navigation Screen Optional Navigation System OptionalTouch of AUX Auxiliary Device OptionalOperating Auxiliary Devices Optional 48-ENMulti-Changer Selection Optional Press SOURCE/POWER Touch of CD ChangerChanger Optional Controlling CD Changer OptionalReceiving Channels with the SAT Receiver Optional HDD Player Operation OptionalSAT Radio Receiver Optional Listening to Music of HDDChecking the SAT Radio ID Number Tuning in to Categorized ProgramsStoring Channel Presets Changing the Display52-EN IPod OptionalSelecting the Channel directly Receiving Weather or Traffic information from SAT RadioSearching by album name Searching for a desired SongSearching by Playlist Searching by artist name54-EN Direct Search FunctionSelecting Playlist/Artist/Album Random Play Shuffle M.I.X55-EN Remote ControlControls on Remote Control 56-EN When Using the Remote Control57-EN Battery ReplacementOpening the battery case Replacing the battery58-EN InformationAbout DVDs TerminologyRating levels parental lock 59-ENDolby Pro Logic Linear PCM audio LpcmFor details, see List of Language Codes60-EN 61-EN List of Country Codes62-EN 63-EN Case of Difficulty64-EN Indication for CD changer 65-ENIndication for DVD/Video CD 66-EN Indication for SAT Receiver ModeChassis Size Monitor section SpecificationsChassis Size Power Amplifier section 67-EN68-EN Installation and Connections69-EN InstallationInstalling the Monitor Installation Location To install using the vehicle’s standard bracket70-EN Installing the Power AmplifierWhen mounting with Velcro fasteners Installing the DC/DC ConverterFoot Brake Lead / Parking Brake Lead Connection Connection Diagram of Spst Switch Sold SeparatelyIf the ACC power supply is not available 71-EN72-EN Connections73-EN Power ANT74-EN 75-EN System ExampleTo Ai-NET Connector Gray To Ai-NET Connector Black Power Supply Connector RGB Input TerminalDigital Output Terminal Ai-NET Connector AUX Video Input Connector AUX InputUse when connecting an optional monitor, etc When Connecting External EquipmentPower Supply Connector AUX Video Input Connector AUX Input Use when connecting a back-up camera

IVA-D100 specifications

The Alpine IVA-D100 is a multimedia receiver designed for a range of vehicle audio and video needs, offering an impressive array of features that cater to drivers and passengers alike. As one of the notable models in Alpine's lineup, it combines cutting-edge technology with user-friendly design, making it a popular choice for enhancing in-car entertainment.

One of the standout features of the IVA-D100 is its large, 7-inch LCD touchscreen display. This screen provides a vibrant and clear interface for navigating through various media options, as well as accessing navigation features if integrated. The display's high resolution ensures that videos, images, and menus are crisp and easy to read, enhancing the overall user experience. Additionally, with its motorized design, the screen can be easily retracted when not in use, providing a sleek and unobtrusive look when driving.

In terms of sound quality, the IVA-D100 does not disappoint. It includes a powerful built-in amplifier and offers extensive audio controls, allowing users to customize their listening experience. Features such as high-pass and low-pass filters, as well as a 9-band equalizer, give users detailed control over sound output. The receiver is also compatible with various audio file formats, including MP3, WMA, and AAC, ensuring playback versatility for users.

The connectivity options available on the IVA-D100 enhance its functionality. It supports Bluetooth for hands-free calling and audio streaming, providing convenience while on the road. This feature is complemented by USB and auxiliary inputs, making it easy to connect smartphones and other devices. Additionally, the receiver is compatible with Alpine's TuneIt app, which allows for further customization and control via a smartphone, adding another layer of interactivity.

Another noteworthy aspect of the IVA-D100 is its integration capabilities with other devices. It supports various navigation and rearview camera systems, enhancing safety and convenience. The optional integration with satellite radio and HD radio ensures that users can enjoy a wide array of entertainment options regardless of their location.

Overall, the Alpine IVA-D100 stands out as a feature-rich multimedia receiver that combines functionality with an aesthetic appeal, making it an ideal addition to any vehicle seeking to upgrade its audio and video capabilities. With its user-friendly interface, customizable audio settings, and robust connectivity options, it caters to both casual listeners and audiophiles, ensuring a satisfactory in-car multimedia experience.