Alpine IVA-D100 owner manual 69-EN, Installing the Monitor Installation Location, Removal

Page 73

Installation

Installing the Monitor

Installation Location

Before deciding on the mounting location, check that opening and closing the display will not hamper gear shifting in that position.

•Install at an angle of within 30 degrees from the horizontal.

•The monitor’s angle is set to 90 degrees at the factory. Depending on the car, the monitor may hit the dashboard when opened. The monitor’s angle can be adjusted and stored in memory so that the monitor will not hit the dashboard when opening. For adjusting the monitor, refer to “Adjusting the Monitor Angle” on page 28.

Even when the vehicle’s battery power is removed, the adjusted monitor angle remains stored in memory.

1 Dashboard

Mounting Bracket

Mounting Sleeve

(Included)

(Included)

 

 

IVA-D100

Flush head Screws (M4 ⋅ 3) (Included)

Slide the mounting sleeve into the dashboard. Install the supplied bracket on the monitor.

 

• Make sure to use the supplied Flush head screw (M4 ⋅ 3) to

 

install the monitor.

 

 

If you use another screw to install the monitor, it may cause a

2

malfunction.

 

 

Screw

 

Hex Nut (M5)

 

 

 

Bolt Stud

 

Meatal Mounting

IVA-D100

 

 

 

Strap

 

 

Ground

 

 

Lead

 

 

 

Front Frame

 

Chassis

(Included)

Wider edge should face down.

Reinforce the monitor unit with a metal mounting strap (not supplied). Secure the ground lead of the unit to a clean metal spot using a screw ( ) already attached to the vehicle’s chassis.

•For the screw marked , use an appropriate screw for the chosen mounting location.

Connect each input lead coming from an amplifier or equalizer to the corresponding output lead coming from the left rear of the IVA-D100. Connect all other leads of the IVA- D100 according to details described in the Connections section.

3

Lock Pin

Slide the IVA-D100 into the dashboard. When the unit is in place, make sure the locking pins are fully seated in the down position. This can be done by pressing firmly in on the unit while pushing the locking pin down with a small screwdriver. This ensures that the unit is properly locked and will not accidentally come out from the dashboard. Install the supplied Front Frame.

Removal

1.Use a small screwdriver (or similar tool) to push the locking pins to the “up” position (see Step 3). As each pin is unlocked, gently pull out on the unit to make sure it does not re-lock before unlocking the second pin.

2.Pull the unit out, keeping it unlocked as you do so.

<JAPANESE CAR >

To install using the vehicle’s standard bracket.

Flush Head Screws (M4 ⋅ 3)

Ground Lead

(Included)

 

 

IVA-D100

Mounting Bracket

•Make sure to use the supplied flush head screw (M4 ⋅ 3) to install the monitor.

If you use another screw to install the monitor, it may cause a

malfunction. However, only if you cannot install with the flush head screws (M4 ⋅ 3), use the supplied screw (M4 ⋅ 6).

69-EN

Page 72 Page 74
Image 73
Page 72 Page 74
Contents IVA-D100 CHA-1214CHM-S630 CHA-S634IVA-D100 Alpine CD Changers Give You More Contents Operating Instructions Other Useful Features TCR PrecautionsOperating Instructions Precautions Disc size Mark logoVideo CD CD singleALL Using DVD-Rs/DVD-RWs/DVD+Rs/DVD+RWs Getting Started Accessory ListLocation of Controls Initial System Start-Up Turning Power On or OffOpening/Closing the Monitor 10-ENLowering Volume Quickly Adjusting the VolumeHow to view the Display Moving the Monitor to be Flat12-EN About the GlideTouch barTouch of Radio Listening to the Radio RadioDisplaying the Numeric Keypad Input Screen 13-ENManual Storing of Station Presets Setting Analog Mode HD Radio mode onlyAutomatic Memory of Station Presets Tuning to Preset Stations15-EN PlaybackX. Random Play Repeat PlaySelecting Folders concerning MP3/ WMA About MP3/WMATerminology 17-ENDVD/Video CD To display the DVD mode screenPlaying a Disc 18-EN19-EN If a menu screen appearsDirect Menu Operations Menu OperationsSearching by Playlist Searching by ProgramStopping Playback PRE Stop Stopping Playback Playing Still Frames PausingFast-forwarding/Fast-reversing Slow Motion PlaybackSelecting Playlist Skip Selecting Program SkipRepeat Playback 22-ENSwitching the Audio Tracks Switching the AngleScroll to Move the Page Forward or Back 23-ENDisplaying the Disc Status for DVD/Video Switching from the disc menu24-EN Adjusting the Audio Other Useful FeaturesPress Setup Setting the LoudnessSearch Function Switching Display ModesRear Selection Function 26-ENBlackout Mode On and Off Switching the Visual Source Only Simultaneous FunctionSetting rear Camera Interruption Cancelling the Simultaneous FunctionSetup Monitor SettingMonitor Setting Operation DVD Setup OperationSetting of the Audio Language Setting of the Menu LanguageSetting of the Subtitle Language Changing the Country Code SettingChanging the Digital Output Setting Setting the Rating Level Parental LockTouch the input screen to enter a new 4-digit password 30-EN31-EN Setting the TV Screen Setting Setting the Downmix ModeSetting of the Bonus Code Setting the DVD-Audio Playback ModeGeneral Setup Operation System Setup Operation Setting the Navigation Mode Setting the External Device Interrupt ModeSetting the AUX Mode Setting the Navigation InterruptionSetting the Picture Output Display Setup OperationSetting the Visual Button Setting the Digital OutputAdjusting the Minimum Level of Backlight Setting the Brightness of the BacklightingSwitching Background Textures Setting Automatic Background TexturesSelecting the Visual EQ Mode Maker’s setting Visual EQ Setting OperationAdjusting Brightness Adjusting Color of PictureAdjusting Image Contrast Adjusting Tint of PictureAdjusting Picture Quality Downloading the Background data40-EN Adjustment Procedure for Dolby SurroundSet MX Mode of the External Audio Processor Setting the SpeakersOver Adjustment 41-EN42-EN Performing Time Correction Manually TCRGraphic Equalizer Adjustments Phase SwitchingParametric Equalizer Adjustments 43-ENSpeaker Setup Setting Bass Sound ControlSetting Bass Compressor Setting Bass FocusAdjusting the acoustic image BI-PHANTOM Setting of Dolby DigitalAchieving powerful high volume sound Adjusting the speaker levels Output LevelStoring Settings in the Memory Adjusting the DVD LevelRecalling the Preset Memory Using the Pro Logic II ModeSwitching the Navigation Screen Optional Linear PCM SettingNavigation System Optional 47-ENOperating Auxiliary Devices Optional Auxiliary Device Optional48-EN Touch of AUXChanger Optional Press SOURCE/POWER Touch of CD ChangerControlling CD Changer Optional Multi-Changer Selection OptionalSAT Radio Receiver Optional HDD Player Operation OptionalListening to Music of HDD Receiving Channels with the SAT Receiver OptionalStoring Channel Presets Tuning in to Categorized ProgramsChanging the Display Checking the SAT Radio ID NumberSelecting the Channel directly IPod OptionalReceiving Weather or Traffic information from SAT Radio 52-ENSearching by Playlist Searching for a desired SongSearching by artist name Searching by album nameSelecting Playlist/Artist/Album Direct Search FunctionRandom Play Shuffle M.I.X 54-ENControls on Remote Control Remote Control55-EN 56-EN When Using the Remote ControlOpening the battery case Battery ReplacementReplacing the battery 57-ENAbout DVDs InformationTerminology 58-ENDolby Pro Logic 59-ENLinear PCM audio Lpcm Rating levels parental lock60-EN List of Language CodesFor details, see 61-EN List of Country Codes62-EN 63-EN Case of Difficulty64-EN Indication for DVD/Video CD 65-ENIndication for CD changer 66-EN Indication for SAT Receiver ModeChassis Size Power Amplifier section Specifications67-EN Chassis Size Monitor section68-EN Installation and ConnectionsInstalling the Monitor Installation Location InstallationTo install using the vehicle’s standard bracket 69-ENWhen mounting with Velcro fasteners Installing the Power AmplifierInstalling the DC/DC Converter 70-ENIf the ACC power supply is not available Connection Diagram of Spst Switch Sold Separately71-EN Foot Brake Lead / Parking Brake Lead Connection72-EN Connections73-EN Power ANT74-EN 75-EN System ExampleDigital Output Terminal Ai-NET Connector Power Supply Connector RGB Input TerminalAUX Video Input Connector AUX Input To Ai-NET Connector Gray To Ai-NET Connector BlackPower Supply Connector AUX Video Input Connector AUX Input When Connecting External EquipmentUse when connecting a back-up camera Use when connecting an optional monitor, etc

IVA-D100 specifications

The Alpine IVA-D100 is a multimedia receiver designed for a range of vehicle audio and video needs, offering an impressive array of features that cater to drivers and passengers alike. As one of the notable models in Alpine's lineup, it combines cutting-edge technology with user-friendly design, making it a popular choice for enhancing in-car entertainment.

One of the standout features of the IVA-D100 is its large, 7-inch LCD touchscreen display. This screen provides a vibrant and clear interface for navigating through various media options, as well as accessing navigation features if integrated. The display's high resolution ensures that videos, images, and menus are crisp and easy to read, enhancing the overall user experience. Additionally, with its motorized design, the screen can be easily retracted when not in use, providing a sleek and unobtrusive look when driving.

In terms of sound quality, the IVA-D100 does not disappoint. It includes a powerful built-in amplifier and offers extensive audio controls, allowing users to customize their listening experience. Features such as high-pass and low-pass filters, as well as a 9-band equalizer, give users detailed control over sound output. The receiver is also compatible with various audio file formats, including MP3, WMA, and AAC, ensuring playback versatility for users.

The connectivity options available on the IVA-D100 enhance its functionality. It supports Bluetooth for hands-free calling and audio streaming, providing convenience while on the road. This feature is complemented by USB and auxiliary inputs, making it easy to connect smartphones and other devices. Additionally, the receiver is compatible with Alpine's TuneIt app, which allows for further customization and control via a smartphone, adding another layer of interactivity.

Another noteworthy aspect of the IVA-D100 is its integration capabilities with other devices. It supports various navigation and rearview camera systems, enhancing safety and convenience. The optional integration with satellite radio and HD radio ensures that users can enjoy a wide array of entertainment options regardless of their location.

Overall, the Alpine IVA-D100 stands out as a feature-rich multimedia receiver that combines functionality with an aesthetic appeal, making it an ideal addition to any vehicle seeking to upgrade its audio and video capabilities. With its user-friendly interface, customizable audio settings, and robust connectivity options, it caters to both casual listeners and audiophiles, ensuring a satisfactory in-car multimedia experience.
Top Page Image Contents