Automatic Memory of Station Presets
1 Press the SOURCE button until the radio frequency appears in the display.
2 Press the BAND button repeatedly until the desired radio band is displayed.
Each press changes the radio bands as follows:
→F1 → F2 → AM
3 Press and hold the A. ME button for at least 2 seconds.
The frequency on the display continues to change while the automatic memory is in progress.
The tuner will automatically seek and store 6 strong stations in the selected band in order of signal strength.
When the automatic memory has been completed, the tuner goes to the station stored in the preset location No. 1.
NOTE
If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began.
Storing into Direct Access Preset (D.A.P.) Band
A combination of radio stations in any band (up to 6 stations) can be manually preset into the D.A.P. band.
1 Press and hold the D.A.P. button for at least 2 seconds until the D.A.P. indicator appears. Press the BAND button to select FM or AM. The selected band will be displayed.
To memorize stations onto the D.A.P. band, follow the steps for the automatic or Manual Storing of Station Presets section above.
NOTE
When using the Automatic Memory function with D.A.P., the first 3 presets will be filled with FM stations and the last 3 are filled with AM stations.
To cancel the D.A.P. mode, press and hold the D.A.P. button for at least 2 seconds. The D.A.P. indicator will turn off.
Tuning to Preset Stations
1 Press the SOURCE button until the radio frequency appears in the display.
2 Press the BAND button repeatedly until the desired band is displayed.
Each press changes the radio bands as follows:
→F1 → F2 → AM
To select the D.A.P. band, press and hold the D.A.P. button for at least 2 seconds until the D.A.P. indicator appears in the display.
3 Press the station preset button that has your desired radio station in memory.
The display shows the band, preset number with a triangle and frequency of the station selected.