Setup
The operation cannot be performed while the vehicle is in motion. In order to operate the setup, enable
General Setups
You can flexibly customize the unit to suit your own preferences and usage.
Use steps 1 through 4 to select one of the Setup modes to modify. See the applicable section below for details about the selected Setup item.
1Touch [ ] on Source Select screen. The System Setup screen is displayed.
2Touch the desired setup item.
1 2 3 4
1System Setup
Dimmer / Dimmer Low Level / Base Color / Beep.
2Aux Setup
Source Name / TV System / Video Signal / HU Vol. Control.
3Navigation Setup
Nav Interrupt / Nav Interrupt Delay / Region
4Camera Setup
Camera Interrupt / Horizontal Flip / Vertical Flip
3 To change an item’s setting(s) touch [▲ ] or [ ▲] for the desired item.
•When there are no more selections to view, the arrow turns gray.
4Touch [ ] to exit setup menu.
System Setup Operations
1
2
1
Touch this to screen alignment settings (See page 12).
2Default
Touch this to restore settings to factory default settings.
Returns to the factory default settings of System setup. The message, "Restore default settings?" appears. Touch "Restore" to go back to the default settings.
•Pressing and holding the Default button resets all settings including display setups.
The message, "Restore all default settings?" appears. Press "Restore" to go back to the factory setting.
Setting the Brightness of the
Backlighting (Dimmer)
High / Low / Auto (Default Setting)
The illumination control adjusts the brightness of the backlighting based on the car ambient lighting for easier viewing.
High: Sets the strongest brightness of the screen.
Low: Sets the brightness of the screen to the same brightness that was set in Dimmer Low Level in “Adjusting the Minimum Level of Backlight (Dimmer Low Level)” (see instructions on page 12).
Auto: Adjusts the brightness of the background illumination of the monitor automatically to the brightness of the car interior.