Alpine CDE-101EM, CDE-102E Installation, Mounting the Microphone CDE-103EBT only, 31-EN

Page 32

Installation

Detachable Front

Panel

Caution

When you install this unit in your car, do not remove the detachable front panel.

If the detachable front panel is removed during installation, you might press too hard and warp the metal plate that holds it in place.

•The main unit must be mounted within 35 degrees of the horizontal plane, back to front.

Less than 35°

1

Mounting Sleeve

 

(Included)

Dashboard

Pressure Plates*

This unit

*If the installed mounting sleeve is loose in the dashboard, the pressure plates may be bent slightly to remedy the problem.

Remove the mounting sleeve from the main unit (see “Removal” on page 31).

2Screw

Hex Nut (M5)

*2 Bolt Stud

Metal

Mounting

Strap

*1

This unit

Ground Lead

Chassis

Reinforce the head unit with the metal mounting strap (not supplied). Secure the ground lead of the unit to a clean metal spot using a screw (*1) already attached to the vehicle’s chassis.

•For the screw marked “*2”, use an appropriate screw for the chosen mounting location.

Connect each input lead coming from an amplifier to the corresponding output lead coming from the left rear of the CDE-103EBT/CDE-102E/CDE-101E/ CDE-101EM. Connect all other leads of the CDE-103EBT/CDE-102E/CDE-101E/CDE-101EM according to details described in the CONNECTlONS section.

3 Slide the CDE-103EBT/CDE-102E/CDE-101E/ CDE-101EM into the dashboard until it clicks. This ensures that the unit is properly locked and will not accidentally come out from the dashboard. Install the detachable front panel.

Removal

1.Remove the detachable front panel.

2.Insert the bracket keys into the unit, along the guides on either side. The unit can now be removed from the mounting sleeve.

This unit

Bracket Keys (Included)

3. Pull the unit out, keeping it unlocked as you do so.

<JAPANESE CAR>

 

 

 

 

 

 

 

 

 

Front Frame

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Screws (M5 × 8)

This unit

 

 

 

 

(Included)

 

 

 

 

 

 

 

 

 

 

 

 

Ground Lead

*3

Mounting Bracket

Secure the ground lead of the unit to a clean metal spot using a screw (*3) already attached to the vehicle’s chassis.

Mounting the Microphone (CDE-103EBT only)

For the sake of safety, mount the microphone in the following location.

•In a stable and secure location.

•In a location that does not inhibit safely driving the vehicle.

•Mount the microphone in a location where the driver’s voice can

easily be picked up.

Choose a location for the microphone that can easily pick up the driver’s voice. Requiring the driver to move towards the microphone for audibility causes a distraction that could be dangerous.

31-EN

Page 31 Page 33
Image 32
Page 31 Page 33
Contents CDE-103EBT Contents Operating Instructions Installation and Connections Operating Instructions Never Attempt the Following On handling Compact Discs CD/CD-R/CD-RW Getting Started Setting Time Presetting Stations ManuallyRadio Listening to RadioPresetting Stations Automatically Tuning to Preset StationsPlayback Insert a disc with the label side facing upRepeat Play X. Random PlaySearching for CD Text Quick SearchAbout MP3/WMA/AAC 10-ENTerminology 11-ENDefeat Sound SettingSetting the Bass Control Setting the Treble Control Adjusting the High Pass FilterSetting the Treble Centre Frequency Setting the Treble LevelOther Functions Displaying the TextDisplaying Time 14-ENTurn the Rotary encoder to change the setting 15-ENSelect Subwoofer Select Subw on or Subw OFFBluetooth Setting Sound CustomizingVisual Customizing External DeviceConnecting to an External Amplifier Power IC Setting the AUX+ Setup ModeSetting the AUX Name mode CDE-103EBT/CDE-102E only 17-ENBluetooth Setup Bluetooth CDE-103EBT onlySetup Before Using 19-EN Hands-Free Phone Control USB memory Optional IPhone/iPod Optional USB Memory Connection OptionalAbout MP3/WMA/AAC File of USB Memory 22-ENPress SOURCE/ to switch to the iPod mode Searching for a desired Song23-EN Press or to select the desired song24-EN Direct Search FunctionRandom Play Shuffle M.I.X Repeat One To cancel repeat play, select off with the above procedure25-EN Information Case of DifficultyBasic RadioAudio IPodIndication for CD Player Indication for USB memoryIndication for iPod Mode Bluetooth modeIndication for all Modes 28-EN29-EN SpecificationsBluetooth Section CDE-103EBT Only Installation and Connections 30-ENInstallation Mounting the Microphone CDE-103EBT only31-EN Pull the unit out, keeping it unlocked as you do soConnections 32-EN33-EN

CDE-103EBT, CDE-101E, CDE-102E, CDE-101EM specifications

Alpine is renowned for its high-quality car audio systems, and the CDE series of head units represents a perfect blend of advanced technology and user-centric features. The CDE-101EM, CDE-102E, CDE-101E, and CDE-103EBT are popular models that cater to various needs, offering a range of functionalities to enhance the in-car experience.

The CDE-101EM stands out with its sleek design and intuitive user interface. It supports a variety of media formats, allowing users to enjoy music from CDs, USB devices, and even Bluetooth-enabled devices. A notable feature is its 18 preset EQ settings, which enable personalized audio tuning. This model is also equipped with a high-quality built-in amplifier, ensuring clear sound at any volume level, and comes with a front auxiliary input for additional connectivity.

The CDE-102E builds on the strengths of its predecessor, offering enhanced Bluetooth connectivity that allows for hands-free calling and audio streaming from smartphones. Its 3-band parametric equalizer provides deeper control over sound, allowing for adjustments to the bass, midrange, and treble to match personal preferences and vehicle acoustics. One highlight of the CDE-102E is its compatibility with Android and iOS devices, streamlining the user experience for smartphone integration.

The CDE-101E is designed for users seeking a straightforward audio solution without compromising on quality. It features a digital AM/FM tuner, enabling access to a vast array of radio stations, along with a large, easy-to-read display that shows track information and radio settings. The user-friendly controls are ideal for on-the-road adjustments, making every journey an enjoyable audio experience.

Lastly, the CDE-103EBT further expands on connectivity options with additional USB ports and advanced Bluetooth features. It includes built-in support for various audio streaming apps, enabling direct access from the head unit. Additionally, it comes with a sophisticated AM/FM tuner with RDS capability, allowing for a richer radio listening experience. The model's expandable architecture means that users can easily add external amplifiers or subwoofers, tailoring the system to their audio desires.

All in all, the Alpine CDE series models—CDE-101EM, CDE-102E, CDE-101E, and CDE-103EBT—each offer a variety of features that enhance the driving experience through superior sound quality and extensive connectivity options. Whether through Bluetooth streaming, USB connectivity, or a classic CD player, these models provide a perfect fusion of technology and convenience.
Top Page Image Contents