Alpine CDE-103EBT, CDE-101EM, CDE-102E owner manual Never Attempt the Following

Page 5

Never Attempt the Following

Do not grip or pull out the disc while it is being pulled back into the player by the automatic reloading mechanism.

Do not attempt to insert a disc into the unit when the unit power is off.

Inserting Discs

Your player accepts only one disc at a time for playback. Do not attempt to load more than one disc.

Make sure the label side is facing up when you insert the disc. “ERROR” will be displayed on your player if you insert a disc incorrectly. If “ERROR” continues to be displayed even though the disc has been inserted correctly, push the RESET switch with a pointed object such as a ballpoint pen.

Playing a disc while driving on a very bumpy road may result in skips, but this will not scratch the disc or damage the player.

New Discs

To prevent the CD from jamming, “ERROR” is displayed if discs with irregular surfaces are inserted or if discs are inserted incorrectly. When a new disc is ejected immediately after initial loading, use your finger to feel around the inside of the centre hole and outside edge of the disc. If you feel any small bumps or irregularities, this could inhibit proper loading of the disc. To remove the bumps, rub the inside edge of the hole and outside edge of the disc with a ballpoint pen or other such instrument, then insert the disc again.

Centre Hole

Centre Hole

 

New Disc

Bumps

Outside

 

(Bumps)

Irregular Shaped Discs

Be sure to use round shape discs only for this unit and never use any special shape discs.

Use of special shape discs may cause damage to the mechanism.

Installation Location

Make sure this unit will not be installed in a location subjected to:

Direct sun and heat

High humidity and water

Excessive dust

Excessive vibrations

Correct Handling

Do not drop the disc while handling. Hold the disc so you will not leave fingerprints on the surface. Do not affix tape, paper, or gummed labels to the disc. Do not write on the disc.

CORRECT

INCORRECTCORRECT

Disc Cleaning

Fingerprints, dust, or soil on the surface of the disc could cause the CD player to skip. For routine cleaning, wipe the playing surface with a clean, soft cloth from the centre of the disc to the outer edge. If the surface is heavily soiled, dampen a clean, soft cloth in a solution of mild neutral detergent before cleaning the disc.

Disc Accessories

There are various accessories available on the market for protecting the disc surface and improving sound quality. However, most of them will influence the thickness and/or diameter of the disc. Using such accessories can cause the disc to be out of standard specifications and may create operational problems. We recommend not using these accessories on discs played in Alpine CD players.

Transparent Sheet

Disc Stabilizer

4-EN

Image 5
Contents CDE-103EBT Contents Operating Instructions Installation and Connections Operating Instructions Never Attempt the Following On handling Compact Discs CD/CD-R/CD-RW Getting Started Presetting Stations Manually Setting TimeRadio Listening to RadioTuning to Preset Stations Presetting Stations AutomaticallyPlayback Insert a disc with the label side facing upX. Random Play Repeat PlayQuick Search Searching for CD TextAbout MP3/WMA/AAC 10-EN11-EN TerminologyDefeat Sound SettingSetting the Bass Control Adjusting the High Pass Filter Setting the Treble ControlSetting the Treble Centre Frequency Setting the Treble LevelDisplaying the Text Other FunctionsDisplaying Time 14-EN15-EN Turn the Rotary encoder to change the settingSelect Subwoofer Select Subw on or Subw OFFSound Customizing Bluetooth SettingVisual Customizing External DeviceSetting the AUX+ Setup Mode Connecting to an External Amplifier Power ICSetting the AUX Name mode CDE-103EBT/CDE-102E only 17-ENBluetooth Setup Bluetooth CDE-103EBT onlySetup Before Using 19-EN Hands-Free Phone Control USB memory Optional USB Memory Connection Optional IPhone/iPod OptionalAbout MP3/WMA/AAC File of USB Memory 22-ENSearching for a desired Song Press SOURCE/ to switch to the iPod mode23-EN Press or to select the desired song24-EN Direct Search FunctionRandom Play Shuffle M.I.X Repeat One To cancel repeat play, select off with the above procedure25-EN Case of Difficulty InformationBasic RadioIPod AudioIndication for CD Player Indication for USB memoryBluetooth mode Indication for iPod ModeIndication for all Modes 28-EN29-EN SpecificationsBluetooth Section CDE-103EBT Only 30-EN Installation and ConnectionsMounting the Microphone CDE-103EBT only Installation31-EN Pull the unit out, keeping it unlocked as you do so32-EN Connections33-EN

CDE-103EBT, CDE-101E, CDE-102E, CDE-101EM specifications

Alpine is renowned for its high-quality car audio systems, and the CDE series of head units represents a perfect blend of advanced technology and user-centric features. The CDE-101EM, CDE-102E, CDE-101E, and CDE-103EBT are popular models that cater to various needs, offering a range of functionalities to enhance the in-car experience.

The CDE-101EM stands out with its sleek design and intuitive user interface. It supports a variety of media formats, allowing users to enjoy music from CDs, USB devices, and even Bluetooth-enabled devices. A notable feature is its 18 preset EQ settings, which enable personalized audio tuning. This model is also equipped with a high-quality built-in amplifier, ensuring clear sound at any volume level, and comes with a front auxiliary input for additional connectivity.

The CDE-102E builds on the strengths of its predecessor, offering enhanced Bluetooth connectivity that allows for hands-free calling and audio streaming from smartphones. Its 3-band parametric equalizer provides deeper control over sound, allowing for adjustments to the bass, midrange, and treble to match personal preferences and vehicle acoustics. One highlight of the CDE-102E is its compatibility with Android and iOS devices, streamlining the user experience for smartphone integration.

The CDE-101E is designed for users seeking a straightforward audio solution without compromising on quality. It features a digital AM/FM tuner, enabling access to a vast array of radio stations, along with a large, easy-to-read display that shows track information and radio settings. The user-friendly controls are ideal for on-the-road adjustments, making every journey an enjoyable audio experience.

Lastly, the CDE-103EBT further expands on connectivity options with additional USB ports and advanced Bluetooth features. It includes built-in support for various audio streaming apps, enabling direct access from the head unit. Additionally, it comes with a sophisticated AM/FM tuner with RDS capability, allowing for a richer radio listening experience. The model's expandable architecture means that users can easily add external amplifiers or subwoofers, tailoring the system to their audio desires.

All in all, the Alpine CDE series models—CDE-101EM, CDE-102E, CDE-101E, and CDE-103EBT—each offer a variety of features that enhance the driving experience through superior sound quality and extensive connectivity options. Whether through Bluetooth streaming, USB connectivity, or a classic CD player, these models provide a perfect fusion of technology and convenience.