DV2007
•Local / Distance Selector: Use the volume control knob to choose between Local or Distance mode. This feature is used to designate the strength of the signals at which the radio will stop during automatic tuning. "Distance" is the default setting, allowing the radio to stop at a broader range of signals. To set the unit to select only strong local stations during automatic tuning, turn the volume control knob until "Local" appears in the display.
•Rear Speaker On/Off (Rear Spk): The rear speaker is turned “ON” by default. If “OFF” is selected, the rear speaker's audio output will be TURNED OFF. Select “ON” to reactivate output to the rear speakers.
•Programmable
(6) to select the a "VOLUME LEVEL” within 5 seconds.
•Beep Tone: The beep tone feature allows you to choose whether or not you hear an audible beep tone when a button is pressed. "BEEP TONE On" is the default setting. Use the volume control knob to select the "BEEP TONE Off" option.
AUDIO MENU
Press the volume control button (4) to access the Audio Menu. You can navigate through the Audio Menu items by pressing the volume control button repeatedly, or by pressing the up >>
(21)or down << (20) buttons. Once the desired menu item appears on the display, adjust that option by turning the volume control knob within 5 seconds. The unit will automatically exit the Audio Menu after five seconds of inactivity. The following menu items can be adjusted.
Volume Level
Use the volume control knob to adjust the Volume level from “00” (lowest) to “46” (highest).
Bass Level
Use the volume control knob to adjust the Bass level range from
Treble Level
Use the volume control knob to adjust the Treble level range from
FRONT PANEL A/V INPUT
With a separately purchased 3.5mm A/V cable adapter , allows you to connect your video, game player, camera, video iPod, etc to this unit.
Connect the external device to A/V input jack |
|
|
located at the front of the panel , then press |
| |
Mode button to select A/V input mode. Press | AV IN |
|
| Left Audio | |
Mode Button again to cancel A/V input Mode | 1 | |
2 Right Audio | ||
and return to previous mode. | 3 | Ground |
4 | Video | |
3.5mm A/V Cable ( not included )
Balance
Use the volume control knob to adjust the Balance between the right and left speakers from “R12” (full right) to “L12” (full left). “C00” represents an equal balance between the right and left speakers.
Fader
Use the volume control knob to adjust the Fader between the front and rear speakers from “R12” (full rear) to “F12” (full front). “C00” represents an equal balance between the front and rear speakers.
NOTE: When the rear speaker is turned off, the “FADER” option is disabled.
7