OPERATING INSTRUCTIONS
9 | 14 | 15 | 17 | 24 | 13 |
| 16 |
| 23 |
19 |
|
|
|
|
|
|
|
| 27 |
|
|
|
|
|
|
|
|
| |
| TRACK/SKIP |
|
|
|
|
|
| EJECT | REL |
|
|
|
|
|
|
|
| NING | 10 |
|
|
|
|
|
|
| VOL | TU |
|
| BAND |
|
|
|
|
|
| 25 | |
|
|
|
|
| SEL |
| |||
|
|
|
|
|
|
|
| ||
|
|
|
| T/F |
| MUTE | VOL |
|
|
|
|
|
|
|
|
|
| ||
18 |
|
|
|
|
|
|
|
| 26 |
1 |
| 8, 22 | 11,21 | 12,20 | 3, 4, 5, 6, 7 |
| 2 | ||
OPERATING INSTRUCTIONS
1POWER(PWR)ON-OFF BUTTON
Press this button ( 
) to turn the unit on and off when the ignition switch is on. When the unit is off, the time of day is automatically displayed on the Liquid Crystal Display (LCD) panel unless the ignition switch is off. If the radio is off when the ignition switch is turned off, the POWER button must be pressed to turn on the radio after the ignition switch is turned on. If the ignition switch is turned off while the radio is on, the radio will come on automatically when the ignition switch is again turned on.
2VOLUME CONTROL BUTTONS
To increase the volume level, press the VOL + button. The volume will increase and the level will be shown on the display panel from a minimum of VOL 0 to a maximum of VOL
63.To decrease the volume level, press the VOL - button. The display will automatically return to the normal indication 5 seconds after the last volume adjustment or when an- other function is activated. These buttons are also used in conjunction with the SEL
button to adjust the bass, treble, balance and fader levels as described in 4,5,6,and 7.
3SELECT (SEL) BUTTON
This button is used to select the audio func- tion (volume, bass, treble, balance or fade) to be adjusted using the VOL + and - buttons. Pressing the Select button once will set the unit for volume adjustment (VOL will appear on the display panel, followed by the setting number). Pressing the button additional times will select bass adjustment (BAS on display panel), treble adjustment (TRE), balance (BAL), fader (FAd), and volume (VOL) again. The dis- play will return to the normal indication 5 seconds after the last adjustment or when another function is activated.
4BASS CONTROL
To adjust the bass level, first select the Bass mode by pressing the SEL button until the BAS indication appears on the display panel. Within 5 seconds of choosing the Bass mode, press the VOL + or - buttons to adjust the bass conditions; the unit should be left in the stereo
7