response as desired. The bass level will be shown on the display panel from a mini- mum of BAS -7to a maximum of BAS 7 (BAS 0 represents flat response), with each change accompanied by a beep tone. The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated.
5TREBLECONTROL
To adjust the treble level, first select the Treble mode by pressing the SEL button until the TRE indication appears on the display panel. Within 5 seconds of choosing the Treble mode, press the VOL + or - buttons to adjust the treble response as desired. The treble level will be shown on the display panel from a minimum of TRE -7to a maximum of TRE 7 (TRE 0 represents flat response), with each change accompanied by a beep tone. The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated.
6LEFT/RIGHTBALANCECONTROL
To adjust the left-right speaker balance, first select the Balance mode by pressing the SEL button until the BAL indication appears on the display panel. Within 5 seconds of choosing the Balance mode, press the VOL + or - buttons to adjust the audio balance between the right channel or left channel speakers, respectively. The balance position will be shown on the display panel from BAL 10 (full left) to BAr 10 (full right), with each change accompanied by a beep tone. When the volume level between the left and right speakers is equal, BAL 0 will be shown on the display panel. The display will automatically return to the normal indica- tion 5secondsafter the last adjustment or when another function is activated.
7FRONT/REARFADERCONTROL
To adjust the front-rear speaker balance, first select the Fader mode by pressing the
SEL button until the FAd indication appears on the display panel. Within 5 seconds of choosing the Fader mode, press the VOL + or - buttons to adjust the front-rear speaker levels as desired. The fader position will be shown on the display panel from FAF 10 (full front) to FAr 10 (full rear), with each change accompanied by a beep tone. When the vol- ume level between the front and rear speak- ers is equal, FAd 0 will appear on the display panel. The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is acti-
vated.
8
When listening to music at low volume levels, this feature will boost the bass and treble ranges to compensate for the characteristics of human hearing. Momentarily press the LOUD/RND button to activate this feature as indicated by LOUD on the display panel. Pressing the button again will deactivate the function and LOUD will disappear from the display.
9AM/FM BAND SELECTOR
During radio play, each time the BAND button is pressed, the radio band changes. The indications AM or FM will appear on the display panel according to your selection.
bl MANUAL TUNING CONTROL
Turn this knob clockwise to tune upward in frequency on the band in use, counter-clock- wise to tune downward in frequency. The fre- quency to which you are tuned will be shown in digital form on the display panel. When tuning in a station, always adjust the control so that the correct broadcast frequency is shown on the display and adjust the control so that you are receiving a clear signal. If the radio is tuned off-frequency, you could experience distorted audio, noise and other reception problems.
