HOW TO CHANGE THE OVEN LIGHT BULB
Disconnect the appliance from the power supply or place the omnipolar switch in the OFF position. Check that the oven is at room temperature, otherwise wait for it to cool.
The oven light bulb must have the following characteristics:
Supply voltage
power 25 W.
Base type: | Rubber seal | ||
Maximum operating temperature 300°C | |||
| |||
| Instruction for changing the light bulb: | frame | |
|
|
1.Unscrew the knurled nut of the
2.Extract the support grill.
3. Unscrew the 4 cross screws located on the corners | glass | |
of the glass support (see drawing to the side). |
| |
4. Place the frame, with glass and seal to protect the |
| |
lamp, on a support surface. |
|
|
5. | Unscrew the | |
6. | Insert and screw in the new light bulb. | |
7. | Reassemble the frame assembly with glass | |
| and seal. |
|
8. | Screw in the 4 screws. |
|
9. | Reassemble the side grill. |
|
10. | Screw on the knurled nut of the side grill. | |
11. | Reconnect power. |
|
HOW TO CHANGE THE COOKING CHAMBER SEAL
The seal located around the cooking chamber must be replaced if it has any cracks.
For safety reasons, the seal must be changed by an Authorized Service Centre technician.
85