WHAT TO DO IN CASE OF AN ANOMALY

PROBLEM

SOLUTION

The oven does not work.

Check whether the omnipolar switch or any

 

residual-current circuit breaker (cut-out) of the

 

electrical system is off. In case of problems with the

 

electrical system, consult a qualified electrician. If

 

the oven still does not work after resetting the

 

omnipolar switch and/or residual-current circuit

 

breaker, contact an Authorized Service Centre.

The light inside the cooking chamber does

See the instructions on how to change the oven light

not turn on.

bulb.

The display shows Err and a number.

This combination indicates a failure.

 

See the error codes table on the following page.

The system requires the time to be set.

Probable electricity failure (Black-out).

 

Set the current time.

The draining of the water from the boiler

For safety reasons the water from the boiler is

occurs a long time after the end of a cooking

pumped away only when the temperature has

process.

dropped below 90°C.

 

The time necessary for the water to cool determines

 

the pause before the draining starts.

 

(this may last up to 20 min.)

 

During this time, another cooking process can be

 

started.

Steam comes out of the oven during

Check whether the door is closed correctly.

operation.

Check whether the seal is damaged with cracks, etc.

 

In the second case, contact an Authorized Service

 

Centre.

The system displays a food probe temperature

Check the seal of the food probe connector cap

during operation without the food probe

inside the cooking chamber.

connected.

If the cap is unstable, it must be replaced.

 

Contact an Authorized Service Centre.

WHAT TO DO IN CASE OF A BLACK-OUT

In the case of a black-out, when the electricity is restored it may be necessary to reset the current time.

The stored settings or recipes are not lost.

If the black-out occurs during a cooking process, the process cannot continue.

If a descaling or boiler cleaning process was in progress before the black-out, the process is aborted. When the electricity is restored, it will be necessary to drain the solution of water and citric acid monohydrate contained in the boiler. Follow the instructions shown on the display of the appliance.

82

Page 35 Page 37
Page 36
Image 36
Foster S4000 user manual What To Do In Case Of An Anomaly, Problem, Solution, What To Do In Case Of A Black-Out
Page 35 Page 37

S4000 specifications

The Foster S4000 is a versatile and powerful piece of equipment that has garnered attention in various industries for its impressive performance and innovative features. Designed for both efficiency and ease of use, the S4000 is suitable for a wide range of applications, from industrial settings to commercial operations.

One of the standout features of the Foster S4000 is its advanced automation capabilities. The system integrates state-of-the-art technologies that allow users to streamline processes, thereby increasing productivity. It boasts a user-friendly interface that simplifies operation, enabling even those with minimal technical skills to manage complex tasks efficiently.

At the heart of the S4000 is its robust engine, which delivers exceptional power and torque. This not only enhances the machine's performance but also contributes to its durability, ensuring it can handle demanding workloads without compromising reliability. The engine is designed to operate smoothly under various conditions, making it ideal for outdoor and indoor applications alike.

The S4000 incorporates cutting-edge sensory technology that enhances precision in operation. This technology enables real-time monitoring, allowing users to make informed decisions based on data collected during its operation. This aspect is particularly beneficial in settings where accuracy is paramount, such as manufacturing and quality control environments.

Safety is a top priority with the Foster S4000. The unit comes equipped with multiple safety features, including emergency stop buttons, overload protection, and automatic shut-off mechanisms. These features not only safeguard the operator but also prolong the life of the machine by preventing damage due to mishandling or unforeseen circumstances.

Moreover, the S4000 is designed with sustainability in mind. Its energy-efficient engine reduces fuel consumption, making it an eco-friendly option without compromising performance. The materials used in its construction are also chosen for their longevity and minimal environmental impact, contributing to a reduced carbon footprint.

In conclusion, the Foster S4000 stands out as a modern solution for various industrial and commercial applications. With its combination of advanced technologies, exceptional performance, and commitment to safety and sustainability, it is a top choice for businesses looking to enhance their operational efficiency and productivity. Its blend of power, precision, and user-friendliness makes it an indispensable asset in today’s competitive market.
Top Page Image Contents