|
| ||||
The Xpress XM7 unit is configured to shut down when the | This feature allows the user to program the Xpress XM7 unit to | ||||
vehicle is shut OFF or power is disconnected. By default, when | automatically shut OFF if the unit remains in an inactive state for | ||||
the power to the unit is reapplied the user must press the | a period of time ranging between 15 Minutes and 3 hours (see | ||||
Power button to turn the unit back ON. This feature allows the | Figure 35). There are 6 available settings: | ||||
user to program the Xpress XM7 unit to automatically turn ON | • | 15 Minutes | |||
when the power to the unit is reapplied (much like a car radio). | • | 30 Minutes | |||
When in the | • | 45 Minutes | |||
Remote control UP and DOWN buttons to highlight either On or | • | 1 Hour | |||
Off (see Figure 34). When the desired setting is highlighted, | • | 2 Hours | |||
press the Rotary/Select Knob, or the remote’s (XM) select button | • | 3 Hours | |||
to enter your selection. Acceptance is confirmed by an audio | This feature is useful in preventing the vehicle battery from | ||||
beep and confirmation screen. | |||||
|
|
|
| draining in cases where the unit is installed with a constant | |
|
|
|
| power source. It is also useful as a Sleep Timer turning the unit | |
|
|
|
| OFF automatically after a period of time. | |
|
|
|
| When in the | |
|
|
|
| ||
|
|
|
| Knob or the Remote Control UP and DOWN buttons to highlight | |
|
|
|
| one of the six (6) time settings you wish to select. | |
|
|
|
|
|
|
When the desired time setting is highlighted, press the Rotary/ Select Knob, or the remote’s (XM) select button to enter your selection. Acceptance is confirmed by an audio beep and confir-