Audiovox XMCK10AP manual Audio Level, Brightness + Contrast

Page 15

Brightness + Contrast

This feature allows the user to adjust the brightness and con- trast of the unit’s display (see Figure 9). Upon entering either the brightness or contrast adjustment mode, a horizontal bar graph is displayed with a minus (-) sign on the left and a plus (+) on the right. Use the Rotary/Select Knob to highlight the contrast or the brightness adjustment. Once the desired adjustment is high- lighted, press the Rotary/Select Knob to enter the adjustment mode. If there is no activity for 12 seconds, the unit will exit to active channel screen.

Brightness mode: Turn the Rotary/Select Knob CW or use the UP arrow on the Remote Control to increase the screen’s bright- ness. Turn the Rotary/Select Knob CCW or use the DOWN ar- row on the Remote Control to decrease the screen’s brightness. Once the desired setting is obtained, press the menu button twice to return to the active channel screen.

Contrast Mode: Turn the Rotary/Select Knob CW or use the UP arrow on the Remote Control to increase the screen’s contrast. Turn the Rotary/Select Knob CCW or use the DOWN arrow on the Remote Control to decrease the screen’s contrast. Once the desired setting is obtained, press the menu button twice to return to the active channel screen.

NOTE: When the Receiver is to be used in battery-operated accessories, such as the Xpress Boom Box (XMB10), to maximize battery life, it is suggested that the bright- ness setting be reduced to a minimal level.

Figure 9. Brightness and Contrast Screen

Audio Level

This feature allows the user to set the audio output signal level (see Figure 10). Upon entering the audio level mode, a horizon- tal bar graph is displayed with a minus (-) sign on the left and a plus (+) on the right. Use the Rotary/Select Knob to adjust the audio level. When the Rotary/Select Knob is turned CW the audio level signal is increased. When the Rotary/Select Knob is turned CCW the audio level signal is decreased. The UP and DOWN buttons on the Remote Control also provide a similar function. When the desired setting is achieved, press the Ro- tary/Select Knob or (XM) Select Button on the Remote Control to confirm.

-15-

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Released Congratulations Page Table of Contents Your Receiver 8-Character Alphanumeric ID Table of FiguresXpress System Components Introduction Optional AccessoriesXMActivation Getting StartedCall-in Activation Process Controls Receiver Control FeaturesXpress Receiver Unit Display Screen Turning Xpress on and OFF Basic OperationMain Menu Screen Menu OptionsFM Frequency FM on or OFF FeatureBrightness + Contrast Audio LevelAudio Level Screen Antenna Aiming Home InstallationDirect Tuning Screen Direct Tune Search ModeMemory Recall Channel Skip/AddTune Select Erase All Tune Select ScreenSelect by Song Confirmation Screen Select By Artist Select By-SongAdd Stock Stock TickerErase Stock Screen Erase All Stock Erase StockErase Some Stock Info ExtrasInfo Extra Screen Display Screen ModeScrolling Display Background ModeSet Clock Time Zone Set Clock Screen Setting Time Zone24 Hour Selection Screen Savings Selection 12/24 HourAuto-On Screenmation screen Auto-On Auto-Off / Sleep TimerAuto-Off / Sleep Timer Screen Set Factory DefaultsExit Menu Search ButtonMemory Selection Screens MemoryPre./Dir Numbered ButtonsDirect Exit Screen Turning The Xpress Unit OFFRemote Control Features Remote ControlPage Page Troubleshooting Care and CleaningSpecifications Month Limited Warranty Page Page Audiovox Electronics Corporation
Top Page Image Contents