Quadra-Fire CASTILEI-MBK B. Clearance To Combustibles, UL and ULC, Installed As A Built-Inunit

Castile Pellet Insert

R

B. Clearance To Combustibles, UL and ULC NOTE: All Clearances are Minimum Clearances

AS A BUILT-IN

A	C	D
B		B
C
0 in. Clearance To Exposed Section And Face Trim

Figure 10.1			Must be installed in a non-tapered enclosure.
					Inches	Millimeters
	A	Top of Hopper		Top Vent	2.0	51
				Rear Vent	2.5	64
	B	Side of Hopper		Top or Rear Vent	2.0	51
	C	Back of Hopper		Top or Rear Vent	4.0	102
	D	Vent Pipe to Combustible		Top or Rear Vent	3.0	76

INSTALLED AS A BUILT-IN UNIT

Shown with Rear Vent and Outside Air

Combustible	12 in
Mantel
	(305mm)
		6 in
	Top Vent:	(152mm)
	2 in. (51mm)
	Rear Vent:
	2.5 in (64mm)
	Back of Hopper:
	4 in (102mm)
	Vent Pipe to	Outside Air
	Combustibles:
	3 in (76mm)

Figure 10.2

WARNING

Fire Risk.

Comply with all minimum clear- ances to combustibles as speci- fied.

Failure to comply may cause house fire.

NOTE:

•Illustrations refl ect typical installations and are FOR DESIGN PURPOSES ONLY.

•Illustrations/diagrams are not drawn to scale.

•Actual installation may vary due to individual design preference.

Page 10 7022-122 January 19, 2011