Quadra-Fire CASTILEI-MBK F. Hearth Support For Standard Surround Only, Castile Pellet Insert

Castile Pellet Insert				R
F. Hearth Support For Standard Surround Only
				Sides
				InstallFirst
			Install Front Last	NOTE: Manually
				pre-shape sides before
Figure 20.1 - Assembled View				installing
			Bend top and bottom tabs toward inside
		8	Figure 20.3
		7
		6
		5
		4
	1		Turn right side up and attach top cast ring
	2	3	Figure 20.4
Figure 20.2
Item		Description
1	Front, 3 inch		Alignment
2	Front, 5 inch		Hole
3 Cast Ring, Top & Bottom, Interchangeable
4	Side, 5 inch		Panel Extension
5	Side, 3 inch
			Figure 20.5
6 Panel Extension, 5 inch

7Panel Extension, 3 inch

8 Panel Extension, Base Plate Only Cast Trim Footer

1.Remove contents from box and lay on protective surface to

avoid scratching the paint.

2. Lay hearth support’s front and sides face down. Bend the tab down toward the inside.

3.The side pieces are shipped fl at. It is much easier to manually

	fl ex the sides into a bowed position before installing.
4.		Figure 20.6
	Lay 1 cast ring face up, which will become the bottom ring when
	installed. Attach the 2 sides FIRST and then the front piece.
	Figure 20.3.
5. Now turn the cast ring right side up and attach the top cast		Panel Leg
	ring . Figure 20.4.
6. Attach the hearth support’s panel extensions. Figure 20.5

7.Attach cast footers. Figure 20.6.

8. Place the assembled hearth support under the insert. Figure
20.7.	Figure 20.7

Page 20 7022-122 January 19, 2011