To play the CD tracks in the programmed order, press the PGM button. PGM will appear on the display, and the tracks on the CD(s) will play in the desired order.
To clear the programmed CD tracks, press the MEM CLR button for more than 3 seconds. M
do DISPLAY (DISP) BUTTON
During disc play, the elapsed time of the current track is displayed when this button is pressed once; when pressed a second time, the remaining playing time on the current track will be displayed. Pressing the button again (a third time) will revert to the track number display.
dp DISC EJECT ( 
)
During CD player operation, disc play is stopped and the disc is ejected when the front panel is folded down and this button on the front of the chassis is pressed. Radio or CD changer operation will automatically resume depending on which mode was in operation prior to disc play. If the disc is not removed from the unit within approximately 10 seconds of being ejected, it will automatically be
accidentally damaged ( 
will appear on the display panel to indicate that a disc is loaded in the player). Play of the disc can be resumed by using the play/pause ( 
) button to choose CD player function.
dq TIME/FREQUENCY SELECTOR (T/F)
During radio operation, press this button to call the time display on the quartz clock. The display will return to the radio frequency indication after 5 seconds.
During integral CD player or cassette player operation,or during CD changer operation, a press of the button will call the time display, but tape or disc play will continue uninterrupted. If the time of day is not adjusted within 5 seconds, the display will return to the play mode currently in effect.
dr THEFT-DETERRENT LED
Located on the chassis behind the front panel, a Light Emitting Diode (LED) will flash when the panel is removed. The flashing light serves as a visual warning to the
ds RESET BUTTON
A RESET button is also accessible behind the front panel and can be used to activate the reset circuitry. However, this feature should only be activated under the following circumstances as it will erase the time and
1.Upon initial installation after all wiring is completed.
2.If there is a malfunction of any of the switches on the unit, pressing the RESET button may clear the system and permit a return to normal operation.
dt FRONT PANEL RELEASE BUTTON (R)
This button is used to release the mechanism that holds the front panel to the chassis. To detach the front panel, press the button so that the panel drops to the lowered position. Press the RELEASE bar at the front edge of the panel and slide the panel off of the front mounting plate. After removing the panel, push the front mounting plate back up to the vertical position.