Bit Rates, MP3 Playing Order, Loading an SD Card

MP6512i

Bit Rates

The unit supports bit rates from 32 - 320 kbps.

MP3 Playing Order

When selected for play, files and folders (Folder Search, File Search or Folder Select) are accessed in the order they were written by the CD writer. As a result, the order in which they are expected to be played may not match the order in which they are actually played. You may be able to set the order in which MP3/WMA files are to be played by writing them onto a medium such as a CD-R with their file names beginning with play sequence numbers such as "01" to "99". For example, a medium with the following folder/file hierarchy is subject to Folder Search, File Search or Folder Select as shown below.

The MP6512i player will only recognize three folder levels and does not display folders containing only other folders. In the example above, the unit will display folders 3, 4, 6, and 8, but not 2 and 7 since they do not contain any tracks directly. Folder 5 is not recognized at all since it is at the fourth level.

Loading an MP3/WMA Disc

After the disc is loaded, “CD Read” is displayed then “MAX” followed by the number of tracks is displayed. The unit will then display ID3 information pertaining to the last selected category (Folder, File, Track, Artist, Album, or Track number and Elapsed time).

Loading an SD Card

Insert the SD card, label side down, into the SD slot on the front of the

MediaLink2. The unit will read the files on the card automatically. The “SD” card icon flashes when an SD card is being read.

3.5mm

Audio Only

SD SLOT

To remove the card, first press the SRC button (7) to switch to another mode and stop SD playback. Grasp the SD card and pull it straight out.

Loading a USB Device

1. Locate the USB jack on the MediaLink2.

3.5mm

Audio Only

USB JACK

2.Insert the USB device into the USB jack. The unit will read the files on the USB device automatically. The “USB” icon flashes when a USB device is being read.

To remove the USB device, press the SRC button (7) to switch to another mode and then remove the USB device from the USB jack.