CD/DVD Changer Control

When a CD or DVD changer is connected to this unit with the 8 pin DIN cable, AV3 mode will change to DISC CHANGER mode and the DISC CHANGER control menu is displayed on the screen.

1.Press the MODE button to select DISC CHANGER (AV3) mode. Each time you press this button, the display changes as follows.

RADIO -> AV1 -> AV2 -> AV3 (CD or DVD CHANGER) -> AV4 (TV)

2.When DISC CHANGER (AV3) mode is selected, the monitor displays the following picture.

3.Press the SEARCH UP/DOWN button to select an item.

4.Press the CH UP/DOWN button to adjust the level of the selected item. You can also adjust the level upward by pushing the BAND button on the unit.

NOTE

1.Each time the MENU button is pressed on DISC CHANGER mode, the menu displayed on the screen changes as follows.

DISC CHANGER -> VOLUME -> USER SELECTOR -> PICTURE -> OSD OFF

2.CD or DVD changer must be connected to the 8 pin DIN socket on the rear of the unit with the 8 pin DIN cable in CD/DVD changer gift box.

3.The video output of DVD changer much be connected to the AV3 video input.

CD/DVDSTATUS This shows the current CD/DVD status (DISK CHECK, SEEK, PLAY, ETC)

PLAYTIME This shows playing time of the disc being played.

DISCNUMBER

1.Press the SEARCH UP/DOWN button to select DISC NUMBER.

2.Each time you press the CH UP button, the disc next in the CD/DVD changer will be selected and the displayed disc number increases by one.

3.Each time you press the CH DOWN button, the previous disc in the CD/DVD changer will be selected and the displayed disc number decreases by one.