CD CHANGER CONTROLS
Built into this radio are controls to operate an optional CD changer. Please check with your Prestige car stereo specialist for recom- mendations of the models that will work with this radio.
Adjustment of the audio functions (volume, tone, balance, and fader) for the CD changer operate in the same manner as they do for radio play. The following controls will operate the CD changer when it is installed and connected to this radio. Refer to the owner’s manual included with the CD changer for instructions on the in- stallation and correct loading and use of the CD magazine.
cr CD MODE (CD)
PLAY/PAUSE SELECTOR
During radio or tape play, press this button to select operation of the CD changer as indicated by “CD” on the display panel. Play will be indicated by the rotating disc symbol and the disc and track numbers on the display panel. If a new magazine has been loaded into the changer, play will begin from the first track of the first disc in the magazine. If a magazine was already in the changer, play will resume from the track on the disc previously in play.
Pressing the button again will temporarily stop play of the disc. The indication “PAUS” will be shown on the display panel and the disc symbol will flash instead of rotating. Press the button again to resume play of the disc.
cs& ctDISC SELECT (+
These buttons are used to select the desired disc for play. To advance to a higher number disc, press the + button cs . To return to a lower number disc, press the - button ct . The num- ber of the disc in play will be shown on the display panel.
cu TRACK SELECT ( / )
These buttons are used to quickly select the beginning of a par- ticular track. With each momentary tap of the Forward Track Select button ( 
), the next higher track number will be selected as shown on the display panel. Similarly, with each momentary tap of the Backward Track Select button ( 
), the next lower track number will be selected. The number of the track in play will be shown on the display panel.
dl CUE/REVIEW FUNCTIONS
(
) to advance rapidly in the forward direction or the Review button (
) to advance rapidly in the backward direction. In either case, the rotating disc symbol on the display panel will turn faster. Release the button to resume normal play from the selected point.
When the Cue button ( 
) is held down and the end of the last track is reached or the Review button ( 
) is held down until the beginning of the first track is reached, the Cue or Review function will stop and the rotating disc symbol will stop turning until the button is released.