Audiovox P-72 owner manual Operating Instructions, ON/OFF Power Button, Volume / Level Control

4 BASS CONTROL

To adjust the bass level, first select the Bass mode by pressing the Select button 3 so that the “BAS.” indication appears on the display panel. Within 5 seconds of choosing the Bass mode,

-1-

OPERATING INSTRUCTIONS		ub		nd
nc qc 1 3 cl br	bt		bs 8obmc blcr

		2
nb
	mbucdl
od
1 ON/OFF POWER BUTTON

Press this button to turn the unit on or off.

2VOLUME / LEVEL CONTROL

To increase the volume level, press the “VOL +” button. The volume will increase and the level will be shown on the display panel from a minimum of “VOL. 0” to a maximum of “VOL. 40”. To increase the volume quickly, keep the button pressed. To decrease the volume level, press the “VOL -” button. Keep the button pressed to decrease the volume quickly. The display will automatically return to the normal indication 5 seconds after the last volume adjustment or when another function is activated. These buttons are also used in conjunction with the Select but- ton 3 to adjust the bass, treble, balance, and fader levels as described in 4 , 5 , 6 and 7 .

P-1 P-2 P-3

qb pc oc 9md 9 ct 9 cs

pb

3SELECT BUTTON (SEL)

This button is used to select the audio function (volume, bass, treble, balance, or fade) to be adjusted using the Level Control 2 . Pressing the Select button once will set the unit for bass adjustment (“BAS.” will appear on the display panel). Pressing the button additional times will select treble (“TRE.” on the dis- play), balance (“BAL.”), fader (“FAD.”) or volume (“VOL.”). The display will automatically return to the normal indication 5 sec- onds after the last adjustment or when another function is acti- vated.