Wiring (continued)
PS475
Speaker Wiring
The Speaker Wiring diagrams illustrate options for connecting speakers and subwoofers.
Passive High and Low Pass Filter Chart
Four Speakers and Two Subwoofers Cuatro Altavoces y Dos Subwoofers Quatre
L
Inductor
C
Capacitor
Frequency |
|
| Speaker Impedance |
|
| ||
Hz. |
|
|
|
|
|
| |
2 Ohms | 4 Ohms | 8 Ohms | |||||
| |||||||
| Inductor (L) | Capacitor (C) | Inductor (L) | Capacitor (C) | Inductor (L) | Capacitor (C) | |
80 | 4.1mH | 1000∝F | 8.2mH | 500∝F | 15mH | 250∝F | |
100 | 3.1mH | 800∝F | 6.2mH | 400∝F | 12mH | 200∝F | |
130 | 2.4mH | 600∝F | 4.7mH | 300∝F | 10mH | 150∝F | |
200 | 1.6mH | 400∝F | 3.3mH | 200∝uF | 6.8mH | 100∝F | |
250 | 1.2mH | 300∝F | 2.4mH | 150∝F | 4.7mH | 75∝F | |
400 | 0.8mH | 200∝F | 1.6mH | 100∝F | 3.3mH | 50∝F | |
600 | 0.5mH | 136∝F | 1.0mH | 68∝F | 2.0mH | 33∝F | |
800 | 0.41mH | 100∝F | 0.82mH | 50∝F | 1.6mH | 26∝F | |
1000 | 0.31mH | 78∝F | 0.62mH | 39∝F | 1.2mH | 20∝F | |
1200 | 0.25mH | 66∝F | 0.51mH | 33∝F | 1.0mH | 16∝F | |
1800 | 0.16mH | 44∝F | 0.33mH | 22∝F | 0.68mH | 10∝F | |
4000 | 0.08mH | 22∝F | 0.16mH | 10∝F | 0.33mH | 5∝F | |
Important: When running a subwoofer and two
Nota: Cuando use juntos un contrabajo y dos altoparlantes de gama completa (operacion trimodal), se deben usar filtros de alto y bajo paso. Si no instala estos filtros puede causar dano a su amplificador o a sus altoparlantes.
Note: Lors de lfutilisation simultanee dfun hautparleur tres basses frequences et deux hautparleurs ordinaires (appele fonctionnement trimodal ou a trois voies), vous devez utiliser des filtres separateurs
C
2
L
2 = 2 minimum
4 = 4 minimum
C
2
C
2
L
C
2
Four Speakers |
Cuatro Altavoces |
Quatre |
4 ohm nominal |
2 ohm minimum |
Two Speakers & Bridged Subwoofer |
Dos Altavoces & Subwoofer en Puente |
Deux |
Two Subwoofers / Bridged Stereo Dos Subwoofers / Stereo en Puente Deux Subwoofers / Stereo en Pont
4 ohm nominal | 4 ohm nominal |
6