Audiovox PROVE8 manual DVD Function Descriptions

DVD Function Descriptions

*Function control is available on the unit and the remote control.

1.POWER Button*

Press this button to turn the PROVE8 on. Press the button again to turn the PROVE8 off.

2.SOURCE Button*

Video signals from video equipment connected to the audio / video inputs can be displayed on the monitor by pressing this button. Each time the button is pressed, the audio / video source will change the sources: DVD, TV, AV1 and AUX.

3.AUTO MEMORY Button*

When the AUTO MEMORY button is pressed, all channels are searched and channels that are detected with signals of sufficient levels are automatically stored. Please refer to page 2 for more information on TV reception.

4.SKIP/SEARCH Button

This button selects between SKIP and SEARCH mode. In “SKIP mode” the TV tuner will tune and stop on channels that are programmed into memory when CHANNEL UP/DOWN buttons are used. When the SKIP mode is disable, the TV will stop on all active channels.

5.ERASE/WRITE Button

While tuned to a channel, pressing this button will store or erase the channel from memory. The stored channel numbers are displayed in “GREEN” on the LCD display screen, and the erased channel numbers are displayed in “RED”.