SPECIFICATIONS / CARE AND MAINTENANCE
9
SPECIFICATIONS
Size: | 7” W x | 2” H x | 6” D |
| 178 mm x | 50 mm x | 150 mm |
Operating Voltage: | 12 volts DC, negative ground | ||
Output Power: | 100 watts maximum (25 watts x 4 channels) | ||
Output Wiring: | |||
| The amplifiers in this unit are NOT designed for use with 2 speakers. | ||
| RCA | ||
Output Impedance: | Compatible with 4 - 8 ohm speakers | ||
500 mv. |
|
| |
Tuning Range: | AM: 530 - 1,710 KHz. (10 KHz. step) | ||
| FM: 87.5 - 107.9 MHz. (200 KHz. step) | ||
Sensitivity: | AM: 20 uv. |
|
|
| FM: 1.5 uv. |
|
|
FM Stereo Separation: | 30 dB |
|
|
Tape Frequency |
| ||
Tape S/N Ratio: | 50 dB |
|
|
Wow & Flutter: | 0.15% WRMS |
| |
*Specifications are subject to change without notice.
CARE AND MAINTENANCE
The radio portion of your new sound system does not require any maintenance. We recommend you keep this manual for future reference on how to set the clock and for general reference of the many features found in this unit.
As with any cassette player, the cassette section of this sound system does require a minimum of maintenance to keep it in good working condition. The following simple care and maintenance suggestions should be followed to prevent malfunctions of the cassette system.
Cassette Care:
1.Purchase a cassette cleaning kit from your local retail store. Use it! At least every 20 to 30 hours of operation you must clean the cassette mechanism. A dirty cassette player will have a poor sound.
2.Do not use cassettes that exceed 45 minutes of play on each side.
3.Do not insert a cassette that appears to be broken, twisted or dirty or with loose or torn labels on it.
4.Always keep your cassettes away from direct sunlight or exposure
to
5.Do not keep a cassette in the player when not in use.
6.Before inserting a cassette in the player, check that the tape is tightly wound on the reels. Take up any excess slack using a pencil to turn the drive hub in the cassette (see diagram).