Audiovox AAAAAV-427V-427V-427V-427V-427 owner manual Br Station PRE-SET Memories, Bt Cassette Door

OPERATING INSTRUCTIONS

7

operation and remain on the selected frequency. Pressing and holding the button for longer than 2 seconds will activate the Auto-Store Tuning feature which will automatically scan and enter up to 6 stations into the 6 pre-set memories on the band in use. After entering the stations into the memories, the unit will automatically stop at each station for 5 seconds so each can be heard. If you have already set the pre-set memories to your favorite stations, activating the Auto-Store Tuning feature will erase those stations and enter the new ones. This feature is most useful when travelling in a new area where you are not familiar with the local stations.

br STATION PRE-SET MEMORIES

To set any of the 6 pre-set memories in each band, use the following procedure:

1. Turn the radio on and select the desired band.

2. Select the first station to be pre-set using the Manual Up/Downbm, or Automatic Seek bnTuning Controls.

3. Press the pre-set button to be set and continue to hold it in for approximately 2 seconds. The pre-set number will appear on the display panel indicating that the station is now set into that pre-set memory position. The station can now be recalled at any time by pressing that button.

4. Repeat the above procedure for the remaining 5 pre-sets on that band and for the other 4 bands on the unit.

bs LIQUID CRYSTAL DISPLAY PANEL

The Liquid Crystal Display (LCD) panel displays the frequency, time, and activated functions.

NOTE: It is a characteristic of LCD panels that, if subjectedtocoldtemperaturesforanextended periodoftime,theymaytakelongertoilluminate than under normal conditions. In addition, the visibility of the numbers on the LCD may slightlydecrease. TheLCDread-outwillreturn to normal when the temperature increases to a normal range.

bt CASSETTE DOOR

Hold the cassette with the exposed tape edge to the right and insert it fully into the cassette door until the cassette is engaged and begins playing (“PLY” will appear on the display panel). When the cassette reaches the end on the side of the tape being played, the unit will automatically change direction of play as

shown by the arrow indications on the display panel. NOTE: Observe cassette operation cautions in Care

and Maintenance section of this manual. bu& clFAST-FORWARD/REWIND BUTTONS

( / )

These buttons cause the tape to move rapidly in the direction indicated by the arrows. For example, if the button is pushed when the tape is moving from left to right ( on the display panel), the tape will fast- forward. If the button is pressed while the tape is moving from right to left (on the display panel), the tape will rewind. To stop fast tape movement, lightly push the opposite button. If the tape is allowed to fast-forward or rewind all the way to the end, play will automatically begin again from that point.

cm PROGRAM SELECTOR

To manually reverse tape direction and play the other side (program) of the cassette, lightly push both the Fast-Forward and Rewind buttons bu and cl at the same time. The change of direction will be shown by the arrows on the display panel.

cn EJECT BUTTON ( )

Tape playback is stopped and the cassette is ejected by pressing this button. Radio operation will automatically resume when the cassette is ejected. NOTE: Never leave a cassette engaged in the player when not in use. Doing so can cause damage to the cassette and/or mechanism of the unit. Always press the eject button and remove the cassette before removing the detachable

front panel.

co CD CHANGER MODE SELECTOR (CD) During radio, or tape play, press this button to select operation of the optional CD changer as shown by “CD-C” and “CdC” on the display panel. Refer to the CD Changer Controls section on page 10 for specific operating instructions.

If the button is pressed when there is no CD changer connected to the unit, the “CD-C” and “CdC” indications will briefly appear on the display panel. The unit will then return to radio operation. To return to the tape operation (if a tape is loaded in the unit), press the button again. Durning tape play, press this button to change to radio operation without ejecting the tape.

cp TIME/FREQUENCY SELECTOR (T/F)

This unit can be set so that either the clock time or radio