2. CONTROLS, INDICATORS AND CONNECTORS
2-9 Indications in Viewfinder (Cont'd)
2. CONTROLS, INDICATORS AND CONNECTORS | AND CONNECTORS |
2-9 Indications in Viewfinder (Cont'd)
●Status 1
In addition to the information on the Status 0 screen, this screen displays audio indicators and information on remaining tape, voltage and lens
Display position | Display | Function |
|
|
|
|
|
|
|
|
|
| |
8 | (Example) | Shows the input level of the audio input channel. |
| |||
| CH1- - - - + - - | Display ON/OFF can be selected using the VF DISPLAY menu screen. |
| |||
| CH2- - - - + - - | ☞ See "AUDIO DISPLAY" on page 72. |
|
|
|
|
9 | STBY | VCR in standby mode |
|
|
|
|
| Note: |
|
| |||
| SAVE | VCR in save mode |
|
|
| |
|
|
|
|
| ||
| When the |
| ||||
| STOP | VCR in stop mode |
| |||
| is connected, the VCR |
| ||||
|
|
|
| |||
Alarm Message Display
|
| ACCU - FOCUS | |
| Alarm message display | G | |
|
| ||
|
|
| F |
|
|
| I |
|
|
| B |
| CH1 | - - - - + - - |
|
F 5 . 6 | CH2 | - - - - + - - |
|
STBY |
| < 6 0 | 1 2 . 4V |
The following alarm messages are displayed on the status 0 and status 1 screens.
| REC | VCR in record mode | operation mode may not | ||
| FF | VCR in | |||
| be displayed correctly. | ||||
| REW | VCR in rewind mode | |||
|
|
| |||
| EJECT | VCR in reverse search mode |
|
| |
0 | (Example) | Remaining tape indication (displayed in | |||
| < 60 | When the tape is used for a long time, the remaining tape may not be |
| ||
| (Example) | indicated accurately. At the beginning of the tape, in particular, the indication |
| ||
| 12: 34: 56: 20 | may show smaller value than the actual one. |
| ||
|
|
|
|
| |
|
| Time code display |
|
| |
|
| Time code display is available when the "REC TIME" item on the VF DISPLAY | |||
|
| menu screen is set to TIME CODE. |
|
| |
|
| ☞ See "REC TIME" on page 72. |
|
| |
A | (Example) | Voltage indication (displayed in 0.1 V steps) |
|
| |
| 12.4V |
|
|
| |
|
|
|
|
| |
B | OPEN, F2, F2.8, F4, | Shows the |
|
| |
It is not displayed when the lens is removed. For some lenses, no display | |||||
| F5.6, F8, F11, F16, | ||||
| appears. |
|
| ||
| CLOSE |
|
| ||
| Display ON/OFF can be selected on the VF DISPLAY menu screen. | ||||
|
| ||||
|
| ☞ See "F NO.DISPLAY" on page 72. |
|
| |
C | (Example) | In the Super Scene Finder (S.S.F.) mode, the number of memorized scenes | |||
| M:99 | is shown. |
|
| |
|
| M : In MARK mode |
|
| |
|
| C : In CUE mode |
|
| |
|
| Number: Number of memorized scenes |
|
| |
●Status 2
This screen displays the camera setup statuses.
Event display is not available while this screen is displayed.
Indication | Indication Contents |
SCENE FILE | A, B, OFF |
|
|
WHITE BAL | A, B, PRESET, FAW |
|
|
FILTER | 3.2K, 5.6K, 5.6K+ND |
|
|
SHUTTER | OFF, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/60.1 to 1/2084.6 (in VARIABLE mode), |
| EEI (in ALC mode) |
GAIN | |
|
|
IRIS LEVEL | NORMAL, BACK L, SPOT L |
|
|
FULL AUTO | ON, OFF |
|
|
REC TIME | Remaining tape time or time code. |
|
|
27
Indication | Contents |
LOW BATTERY | The battery capacity is nearly exhausted. |
CLOSE CASSETTE COVER | The cassette cover is not closed. |
VTR WARNING [HEAD] | Head clogging |
VTR WARNING [SERVO] | Servo error |
VTR WARNING [DEW] | Condensation |
VTR WARNING [HARD] | Hardware error |
VTR WARNING [STOP] | Operation stopped |
VTR WARNING [REW] | Rewinding abnormality |
|
|
TAPE NEAR END | Remaining tape time is less than about 2 minutes in the record mode |
TAPE END | Tape end reached |
REC INHIBIT | An unrecordable videocassette (the switch on the back of the cassette is set to SAVE) is |
| inserted. |
NO TAPE | VTR trigger is pressed with no tape loaded. |
28 | 29 |
